Keller Levelgage Submersible Level Transmitter, 316 SS & PE Cable, 0 to 15 psi (0 to 34.65 ft/H2O), 40'L Cable
Description
- Less than 1" diameter for tight installations
- NSF/ANSI 372 & 61 certified for drinking water use
- Made in the USA
- Lifetime warranty against lightning and power surges
Take accurate level measurements in a variety of water and wastewater applications with these rugged submersible transmitters. They are ideal for lift station, water tank and borehole site level measurements.
Levelgage transmitters feature ±1% accuracy, plus an analog 4-20 mA output. Stainless steel construction.. Keller transmitters feature an integral cable vent tube for fast response and accurate readings, a lifetime lightning/surge protection guarantee and are made in the USA.
Optional accessories: Line Protector (stock # 71154) provides additional lightning/surge protection on external wiring. To protect vent tube ends in humid environments, install a drying tube assembly (stock # 71087).
Don't see what you need here? Custom models are available for all transmitters, with typical shipping times of under one week. Options include pressure ranges, cable lengths, wetted materials, and models tolerating supply voltages below 11 VDC. Contact Technical Support for more information.
NOTE: Supply voltages ≥15 VDC recommended; adequate supply voltage depends upon application specifics. Long cable lengths and ancillary equipment in the loop can increase supply voltage requirements. Contact Technical Support to discuss your application.
- Range (PSI): 0 to 15
- Range (ft/H2O): 0 to 34.65
- Cable length: 40'
- Wetted materials: 316 SS, polyamide
- Cable: polyethylene (PE) jacket and EPDM seal
- Accuracy: ±1% of range
- Power: 11-28 VDC (min. 15 VDC recommended)
- Output: 4-20 mA, 2-wire
- Temperature range: 14 to 140°F (compensated)
- Rating: NSF/ANSI 372 & 61
Product Information
- Item number
- 70794
- Brand Name
- Keller
- Catalog Page
- 847
- Net weight
- 1.2
- Condition
- New
Accessories
Related
Keller Levelgage Submersible Level Transmitter, 316 SS & PE Cable, 0 to 15 psi (0 to 34.65 ft/H2O), 40'L Cable
- Item number
- 70794
- Brand Name
- Keller
- Catalog Page
- 847
- Net weight
- 1.2
- Condition
- New
- Less than 1" diameter for tight installations
- NSF/ANSI 372 & 61 certified for drinking water use
- Made in the USA
- Lifetime warranty against lightning and power surges
Take accurate level measurements in a variety of water and wastewater applications with these rugged submersible transmitters. They are ideal for lift station, water tank and borehole site level measurements.
Levelgage transmitters feature ±1% accuracy, plus an analog 4-20 mA output. Stainless steel construction.. Keller transmitters feature an integral cable vent tube for fast response and accurate readings, a lifetime lightning/surge protection guarantee and are made in the USA.
Optional accessories: Line Protector (stock # 71154) provides additional lightning/surge protection on external wiring. To protect vent tube ends in humid environments, install a drying tube assembly (stock # 71087).
Don't see what you need here? Custom models are available for all transmitters, with typical shipping times of under one week. Options include pressure ranges, cable lengths, wetted materials, and models tolerating supply voltages below 11 VDC. Contact Technical Support for more information.
NOTE: Supply voltages ≥15 VDC recommended; adequate supply voltage depends upon application specifics. Long cable lengths and ancillary equipment in the loop can increase supply voltage requirements. Contact Technical Support to discuss your application.
- Range (PSI): 0 to 15
- Range (ft/H2O): 0 to 34.65
- Cable length: 40'
- Wetted materials: 316 SS, polyamide
- Cable: polyethylene (PE) jacket and EPDM seal
- Accuracy: ±1% of range
- Power: 11-28 VDC (min. 15 VDC recommended)
- Output: 4-20 mA, 2-wire
- Temperature range: 14 to 140°F (compensated)
- Rating: NSF/ANSI 372 & 61