Rosemount 8750WD 2" Electromagnetic Flowmeter w/ Integral Display
Description
- Built-in operator interface for quick and easy set-up
- Advanced diagnostics for maximum performance with minimal maintenance
Rosemount 8750W electromagnetic flowmeters are engineered specifically for the water and wastewater industry. They feature transmitters with an easy-to-use operator interface and advanced built-in diagnostic capabilities for minimal maintenance. The intuitive keypad provides instant access to the most commonly used functions, and the backlit LCD screen displays easy-to-read results. Together, these features allow for fast configuration and easy meter operation.
The flow tube is carbon steel welded, protecting all internal components from moisture and other contaminants associated with hostile environments. This ensures maximum flow tube reliability. Flowmeters also feature dampening, over-range capabilities and empty-pipe and low-flow cutoff detection. To prevent tampering, use the convenient display lockout. Meters provide a 4-20 mA HART® output signal and a scalable pulse output. Pulse outputs require external power sources rated from 5 to 24 VDC.
Integral models offer a one-piece design. They feature a 2-line x 16-character display and four optical switches to simplify adjustments without the need to remove the front cover.
Materials: polyurethane tube lining, aluminum, NEMA 4X transmitter housing, 316L stainless steel electrodes, carbon steel tube flange. 150# flanges.
Note: Nonmetallic pipes require grounding rings (sold separately). Contact USABlueBook for information on flowmeters with different sizes, liner materials, approval ratings, higher accuracy (±0.25%) or other features.
- Size: 2"
- GPM: 10 to 412
- Length: 7.87"
- Range: 0 to 39 ft/sec
- Accuracy: ±0.5%
- Output: pulse and 4-20 mA (HART® protocol) signals, passive or active (user-selectable)
- Conductivity: ≥ 5µS/cm
- Working pressure: 285 psi @ 100°F
- Process connections: Class 150 FLG, ANSI
- Power: 90-250 VAC, 50-60 Hz
Product Information
- Item number
- 19681
- Brand Name
- Emerson/Rosemount
- Catalog Page
- 387
- Net weight
- 26.8
- Condition
- New
Accessories
Related
Rosemount 8750WD 2" Electromagnetic Flowmeter w/ Integral Display
- Item number
- 19681
- Brand Name
- Emerson/Rosemount
- Catalog Page
- 387
- Net weight
- 26.8
- Condition
- New
- Built-in operator interface for quick and easy set-up
- Advanced diagnostics for maximum performance with minimal maintenance
Rosemount 8750W electromagnetic flowmeters are engineered specifically for the water and wastewater industry. They feature transmitters with an easy-to-use operator interface and advanced built-in diagnostic capabilities for minimal maintenance. The intuitive keypad provides instant access to the most commonly used functions, and the backlit LCD screen displays easy-to-read results. Together, these features allow for fast configuration and easy meter operation.
The flow tube is carbon steel welded, protecting all internal components from moisture and other contaminants associated with hostile environments. This ensures maximum flow tube reliability. Flowmeters also feature dampening, over-range capabilities and empty-pipe and low-flow cutoff detection. To prevent tampering, use the convenient display lockout. Meters provide a 4-20 mA HART® output signal and a scalable pulse output. Pulse outputs require external power sources rated from 5 to 24 VDC.
Integral models offer a one-piece design. They feature a 2-line x 16-character display and four optical switches to simplify adjustments without the need to remove the front cover.
Materials: polyurethane tube lining, aluminum, NEMA 4X transmitter housing, 316L stainless steel electrodes, carbon steel tube flange. 150# flanges.
Note: Nonmetallic pipes require grounding rings (sold separately). Contact USABlueBook for information on flowmeters with different sizes, liner materials, approval ratings, higher accuracy (±0.25%) or other features.
- Size: 2"
- GPM: 10 to 412
- Length: 7.87"
- Range: 0 to 39 ft/sec
- Accuracy: ±0.5%
- Output: pulse and 4-20 mA (HART® protocol) signals, passive or active (user-selectable)
- Conductivity: ≥ 5µS/cm
- Working pressure: 285 psi @ 100°F
- Process connections: Class 150 FLG, ANSI
- Power: 90-250 VAC, 50-60 Hz