Grundfos® SCALA2 Variable Speed Booster Pump, 115V, 93013251
Description
- Plug-and-play operation—all necessary components built in
- Variable-speed motor
Use these pumps for everything from boosting domestic water pressure to pumping seal water from a break tank, and even pulling water from shallow wells. Their all-inclusive design makes installation simple. Pumps come complete with pressure and flow sensors, controls, pressure tank, check valve and power cord—just plug in and pump!
SCALA2 pumps with variable-speed motors use both integrated speed control plus pressure and flow sensors to deliver perfect water pressure across varying flow rates. The simple on-board control panel lets you boost incoming pressure by between 22 to 80 psi, and gives you clear visual indication of status and alarms. Alarm indications include power failure, pump blockage, system leak, dry run or water shortage, over pressure, over temperature and more.
Construction: Noryl® plastic; multi-stage, closed impellers; mechanical, carbon/ceramic seals; 6.5' cord w/ grounded plug. Enclosure NEMA 3 rated.
- Suction lift: 26' at sea level
- Solids handling: clean water only
- Suction/discharge: 1" NPT(M)
- Max inlet/working pressure: 87 psi / 145 psi
- Max liquid temp: 113°F
Product Information
- Item number
- 75696
- Brand Name
- Grundfos
- Catalog Page
- 1228
- Net weight
- 26
- Condition
- New
Related
Grundfos® SCALA2 Variable Speed Booster Pump, 115V, 93013251
- Item number
- 75696
- Brand Name
- Grundfos
- Catalog Page
- 1228
- Net weight
- 26
- Condition
- New
- Plug-and-play operation—all necessary components built in
- Variable-speed motor
Use these pumps for everything from boosting domestic water pressure to pumping seal water from a break tank, and even pulling water from shallow wells. Their all-inclusive design makes installation simple. Pumps come complete with pressure and flow sensors, controls, pressure tank, check valve and power cord—just plug in and pump!
SCALA2 pumps with variable-speed motors use both integrated speed control plus pressure and flow sensors to deliver perfect water pressure across varying flow rates. The simple on-board control panel lets you boost incoming pressure by between 22 to 80 psi, and gives you clear visual indication of status and alarms. Alarm indications include power failure, pump blockage, system leak, dry run or water shortage, over pressure, over temperature and more.
Construction: Noryl® plastic; multi-stage, closed impellers; mechanical, carbon/ceramic seals; 6.5' cord w/ grounded plug. Enclosure NEMA 3 rated.
- Suction lift: 26' at sea level
- Solids handling: clean water only
- Suction/discharge: 1" NPT(M)
- Max inlet/working pressure: 87 psi / 145 psi
- Max liquid temp: 113°F