Zoeller Waste-Mate Submersible Sewage Pump, Manual, 0.5HP/230V/1PH, E267
Description
- 2" solids handling
- 2" NPT(F) discharge
- CSA & UL approved
The Model 267 features optional float operated, submersible (NEMA 6) 2 pole mechanical switch. Durable cast iron construction. Cast iron switch case, motor and pump housing, and base. No sheet metal parts to rust or corrode.
Non-clogging vortex impeller design. Engineered plastic impeller with metal inserts. Not affected by dirt, sand and foreign materials frequently found in drainage and sewage sumps. Stainless steel screws, bolts, handle, guard, and arm and seal assembly. UL Listed 3-wire neoprene cord and plug (10' cord is standard for automatic; 15-ft standard for non-automatic). Thermal overload protection on single phase pumps. Oil-filled motor is hermetically sealed. 60 cycle, 1725 rpm, 1/2 hp. Carbon/ceramic shaft seal. Bearing running in bath of oil. On point is 11-1/4"; off point is 5-1/4" (automatic units). Major width: 12-1/2". Height: 14-1/4". Weight: 50 lbs. Rated 130°F.
Product Information
- Item number
- 34263
- Brand Name
- Zoeller Pump Company
- Catalog Page
- 1160
- Net weight
- 49
- Condition
- New
Zoeller Waste-Mate Submersible Sewage Pump, Manual, 0.5HP/230V/1PH, E267
- Item number
- 34263
- Brand Name
- Zoeller Pump Company
- Catalog Page
- 1160
- Net weight
- 49
- Condition
- New
- 2" solids handling
- 2" NPT(F) discharge
- CSA & UL approved
The Model 267 features optional float operated, submersible (NEMA 6) 2 pole mechanical switch. Durable cast iron construction. Cast iron switch case, motor and pump housing, and base. No sheet metal parts to rust or corrode.
Non-clogging vortex impeller design. Engineered plastic impeller with metal inserts. Not affected by dirt, sand and foreign materials frequently found in drainage and sewage sumps. Stainless steel screws, bolts, handle, guard, and arm and seal assembly. UL Listed 3-wire neoprene cord and plug (10' cord is standard for automatic; 15-ft standard for non-automatic). Thermal overload protection on single phase pumps. Oil-filled motor is hermetically sealed. 60 cycle, 1725 rpm, 1/2 hp. Carbon/ceramic shaft seal. Bearing running in bath of oil. On point is 11-1/4"; off point is 5-1/4" (automatic units). Major width: 12-1/2". Height: 14-1/4". Weight: 50 lbs. Rated 130°F.