Flat Spray Nozzle, 3/8" Bore, 1/2" NPT Fitting
Description
- Features hard flat spray pattern
- Easy flush design
- Low cost
This economical, non-clog foam control spray nozzle produces a wide bank spray pattern while using minimum pressure and water volume. Only 2.7 psi of pressure and 2 gpm flow provides a wide, flat spray pattern 60" wide at a distance of 18" from the nozzle tip. This nozzle can handle contaminated liquids as the cap is spring loaded. Should the nozzle become clogged, just lift the cap to purge any blockage.
The nozzle is constructed of tough Delrin plastic with a large 1/2" NPT thread opening that can pass larger particles than many other models. Length of nozzle is 3" (overall) with 3/8" bore. Fitting is 1/2" NPT.
Molded 1/2" NPT threads
Product Information
- Item number
- 48912
- Brand Name
- Evoqua Water Technologies
- Catalog Page
- 59
- Net weight
- 0.2
- Condition
- New
Flat Spray Nozzle, 3/8" Bore, 1/2" NPT Fitting
- Item number
- 48912
- Brand Name
- Evoqua Water Technologies
- Catalog Page
- 59
- Net weight
- 0.2
- Condition
- New
- Features hard flat spray pattern
- Easy flush design
- Low cost
This economical, non-clog foam control spray nozzle produces a wide bank spray pattern while using minimum pressure and water volume. Only 2.7 psi of pressure and 2 gpm flow provides a wide, flat spray pattern 60" wide at a distance of 18" from the nozzle tip. This nozzle can handle contaminated liquids as the cap is spring loaded. Should the nozzle become clogged, just lift the cap to purge any blockage.
The nozzle is constructed of tough Delrin plastic with a large 1/2" NPT thread opening that can pass larger particles than many other models. Length of nozzle is 3" (overall) with 3/8" bore. Fitting is 1/2" NPT.
Molded 1/2" NPT threads