Peltier technology decreases energy use by over 70%
•
Industry-leading 3-year warranty
PlantPRO BOD incubators provide a highly stable, uniform and controlled storage climate for samples during the 5-day BOD incubation period. PID temperature control and a mechanical convection system ensure even air distribution in the chamber.
The large LED display shows set point and chamber temperature. If the temperature exceeds the overtemp set point, a visual alarm lights, heating cuts off, and cooling continues until temperature falls below the set point. An audible and visual alarm is triggered when the door is open for more than 60 seconds. For temperature controller calibration and validation, the thermometer access port provides an opening to place a digital thermometer in the chamber (not included).
Incubators feature innovative Peltier cooling technology that uses no environmental harmful refrigerants and eliminates the need for a refrigeration compressor—decreasing energy requirements by over 70%. Aluminum interior is easy to clean and disinfect. For best results, room temperature should be between 15 and 30°C (59 and 86°F) at less than 80% humidity.
Includes: four leveling feet, two side air duct panels and manual. 3 cu ft model also includes: a 4-amp internal outlet, two wire shelves and eight shelf clips. 6 cu ft model also includes: a 4-amp internal outlet, two wire shelves and four sliding brackets. 20 cu ft model also includes: a 5.5-amp internal outlet, five wire shelves and ten sliding brackets. 3-year warranty for all models.
