Real-time transmittance (UVT) or absorbance (UV254) organics monitoring
Accessory Systems (Real Clean System I shown) mount remotely from main analyzer.
Real Tech M3000 Online UV Analyzers
•
Tracks indicators for disinfection byproduct (DBP) potential
•
Confirms the efficiency of your UV system
Continuously monitor, control and optimize efficiency of your UV disinfection process water with the M3000 UV analyzer. This all-in-one unit determines concentration of potentially problematic aromatic organic matter. It emits ultraviolet light at a 254 nm wavelength, then measures how much UV the organics absorb. It’s ideal for optimizing coagulation dosage, tracking DBP formation potential, monitoring source water, or any application where other organics monitoring solutions would be too complex or costly.
Continuous readings across two angles of the flow cell effectively perform constant calibration, which provides inherent compensation for flow cell fouling and lamp fluctuations. This gives you long-term assurance of measurement values and accuracy, and increased analyzer usage time between manual or in-situ calibration cycles.
Each analyzer includes a dehumidifier with a removable regenerating desiccant system (110 VAC plug-in) that keeps the flow cell free of interference caused by condensation. Routine analyzer maintenance includes replacing the UV lamp and ribbon cable after 18 months. Warning systems indicate low lamp life around 12,000 operating hours.
Includes: flow cell, calibration bottle, dehumidifier and standard power supply. Automatic chemical cleaning systems and additional accessories are sold separately below.
Other UV254 models are available, with options such as integrated turbidity compensation (550 nm upgrade), alternate path lengths, and other UVA/UVT ranges. Contact USABlueBook’s Technical Specialists for more information.
Enhance operation and extend time between maintenance cycles
•
Systems mount on wall in their individual NEMA 4 enclosures
Real Clean System I reduces fouling in the flow cell. It automatically pumps cleaning solution to the analyzer at user-defined intervals. Much of the solution is recycled to prolong resources. The system automatically stops sample inlet water flow to the M3000 in the event of leaks or other emergencies.
Real Pump Clean System I includes the Real Clean System I and a sample inlet pumping component for use in open channel or nonpressurized applications with low solids content. Max head height of 8 feet and max horizontal distance of 25 feet.
Dual Feed System I upgrades your system to monitor two water sample lines with one M3000 analyzer. Sample before and after treatment for removal efficiency. It also provides a second 4-20 mA output.
