BJM LWA™ Submersible Agitator Dewatering Pump, 3HP/460V/3PH, 3"NPT(M), LWAE22-460T
Description
- Built-in agitator mixes settled solids with pump flow
- Hardened and high-chrome wetted parts stand up to abrasive applications
- Features continuous duty motor
Rugged yet lightweight agitator pumps are ideal for dewatering in sand, silt, grit chambers and other abrasive applications. They feature a built-in agitator that mixes settled solids with pump water to restore sump or basin volume. All wetted parts are constructed of hardened or high-chrome iron, so these pumps last longer than rubber lined or cast iron pumps.
Shipping: Ships motor freight.
- Solids handling: 0.4"
- Construction: 304 SS motor housing and external hardware, high chrome iron impeller and wear plate, hardened ductile iron agitator and volute, Buna-N elastomers
- Impeller: semi-open; Seal: double mechanical, silicon carbide/silicon carbide lower, carbon/ceramic upper, in oil filled chamber
- Motor: 3 hp, 460V, 4.1A, 3 ph; air-filled, auto reset overload switch, 3450 rpm, 1.15 service factor
- Max liquid temp: 104°F; Discharge: 3" vertical NPT(M); Cord: 50'L, bare leads; Weight: 97 lbs
Product Information
- Item number
- 57959
- Brand Name
- BJM Pumps
- Net weight
- 170
- Condition
- New
Accessories
BJM LWA™ Submersible Agitator Dewatering Pump, 3HP/460V/3PH, 3"NPT(M), LWAE22-460T
- Item number
- 57959
- Brand Name
- BJM Pumps
- Net weight
- 170
- Condition
- New
- Built-in agitator mixes settled solids with pump flow
- Hardened and high-chrome wetted parts stand up to abrasive applications
- Features continuous duty motor
Rugged yet lightweight agitator pumps are ideal for dewatering in sand, silt, grit chambers and other abrasive applications. They feature a built-in agitator that mixes settled solids with pump water to restore sump or basin volume. All wetted parts are constructed of hardened or high-chrome iron, so these pumps last longer than rubber lined or cast iron pumps.
Shipping: Ships motor freight.
- Solids handling: 0.4"
- Construction: 304 SS motor housing and external hardware, high chrome iron impeller and wear plate, hardened ductile iron agitator and volute, Buna-N elastomers
- Impeller: semi-open; Seal: double mechanical, silicon carbide/silicon carbide lower, carbon/ceramic upper, in oil filled chamber
- Motor: 3 hp, 460V, 4.1A, 3 ph; air-filled, auto reset overload switch, 3450 rpm, 1.15 service factor
- Max liquid temp: 104°F; Discharge: 3" vertical NPT(M); Cord: 50'L, bare leads; Weight: 97 lbs