Dry Polymer Eductor, 1/4" NPT
Description
- Part of a two-part polymer disperser; also requires funnel (stock # 350348)
- Provides economical polymer blending
- No moving parts to wear out
This polymer disperser provides an economical means of blending polymer. Its simple design consists of a 3/4" NPT eductor and a funnel (each sold separately). Just connect your clean water supply to the eductor and pour the dry polymer in the funnel. As water flows through the eductor, a vacuum is created, pulling in the dry polymer.
This polymer disperser can effectively wet 5 pounds of dry polymer for each 10 to 15 gallons of water supplied to the unit. This results in a 4 to 6% concentration of polymer feed. This mixture is then sent to a tank or drum for further mixing until the dry polymer is completely dissolved. For correct operation, you must use water supply pressure from 20 to 100 psi.
For a complete system, order this eductor (stock # 350347) and a funnel (stock # 350348).
Product Information
- Item number
- 350347
- Catalog Page
- 169
- Net weight
- 0.02
- Condition
- New
Related
Dry Polymer Eductor, 1/4" NPT
- Item number
- 350347
- Catalog Page
- 169
- Net weight
- 0.02
- Condition
- New
- Part of a two-part polymer disperser; also requires funnel (stock # 350348)
- Provides economical polymer blending
- No moving parts to wear out
This polymer disperser provides an economical means of blending polymer. Its simple design consists of a 3/4" NPT eductor and a funnel (each sold separately). Just connect your clean water supply to the eductor and pour the dry polymer in the funnel. As water flows through the eductor, a vacuum is created, pulling in the dry polymer.
This polymer disperser can effectively wet 5 pounds of dry polymer for each 10 to 15 gallons of water supplied to the unit. This results in a 4 to 6% concentration of polymer feed. This mixture is then sent to a tank or drum for further mixing until the dry polymer is completely dissolved. For correct operation, you must use water supply pressure from 20 to 100 psi.
For a complete system, order this eductor (stock # 350347) and a funnel (stock # 350348).