Flow Switch Controller, CF-112N, 2" Tee, 110V, Noryl/SS
Description
- Use for alarm notification, flow verification and safety cutoff
- Simple plug-in design for direct control of your chemical feed pump!
Harwil's CF series flow switch controllers do much more than just add a powered control switch to your process. Their simple design with a standard three-prong 120-VAC plug allows use in almost any application—use for basic alarm notification, indication of flow verification, or direct control of chemical feed pumps. Unit can be mounted vertically or horizontally.
CF-112 models are simple control devices with two indicator lights for power input status and flow present status (flow on). Units feature a 6'L power cord, a second 6'L cord for direct switching of loads up to 1/3 hp, and a PVC tee fitting with slip ends.
- Temperature limit: 180°F; Pressure limit (max): 250 psig
- Flow on / off points (gpm): 4.9 / 4.4
- Relay (SPNO): 10A @ 120 VAC; Mounting orientation: vertical or horizontal; Set point adjustment: fixed
- Wetted materials: 316 SS shaft; Noryl® (PPO = polyphenylene oxide) body; EPDM & epoxy seal
- Process connection: 3/4" NPT(M) (installed in the included tee with slip ends)
Product Information
- Item number
- 29223
- Brand Name
- Harwil Corporation
- Catalog Page
- 399
- Net weight
- 1.6
- Condition
- New
Accessories
Related
Flow Switch Controller, CF-112N, 2" Tee, 110V, Noryl/SS
- Item number
- 29223
- Brand Name
- Harwil Corporation
- Catalog Page
- 399
- Net weight
- 1.6
- Condition
- New
- Use for alarm notification, flow verification and safety cutoff
- Simple plug-in design for direct control of your chemical feed pump!
Harwil's CF series flow switch controllers do much more than just add a powered control switch to your process. Their simple design with a standard three-prong 120-VAC plug allows use in almost any application—use for basic alarm notification, indication of flow verification, or direct control of chemical feed pumps. Unit can be mounted vertically or horizontally.
CF-112 models are simple control devices with two indicator lights for power input status and flow present status (flow on). Units feature a 6'L power cord, a second 6'L cord for direct switching of loads up to 1/3 hp, and a PVC tee fitting with slip ends.
- Temperature limit: 180°F; Pressure limit (max): 250 psig
- Flow on / off points (gpm): 4.9 / 4.4
- Relay (SPNO): 10A @ 120 VAC; Mounting orientation: vertical or horizontal; Set point adjustment: fixed
- Wetted materials: 316 SS shaft; Noryl® (PPO = polyphenylene oxide) body; EPDM & epoxy seal
- Process connection: 3/4" NPT(M) (installed in the included tee with slip ends)