Hydrant Maintenance Season is Here! Hydrant Maintenance Season is Here!
USABlueBook has what you need for winter preparation and seasonal hydrant maintenance. We have the right solutions to help you get your hydrants ready for winter.
Click on the product names listed under each category to see the complete product details.
USABlueBook has what you need for winter preparation and seasonal hydrant maintenance. We have the right solutions to help you get your hydrants ready for winter.
Click on the product names listed under each category to see the complete product details.
Hydrant Marking & Flags
Make sure your hydrants are properly marked before cold weather arrives. You’ll thank yourself later!
Heavy-Duty Fiberglass Hydrant Markers
Heavy-Duty Fiberglass Hydrant Markers
• Ultra strong and corrosion resistant
• 3/8" diameter with reflective bands—easy to spot day and night
View Details >>
USABlueBook Spring Steel Hydrant Markers
• Red and white reflective bands provide maximum visibility
• Rugged construction takes abuse and lasts for years
View Details >>
Steel Hydrant Markers with Flag
• Maximum quality at minimal cost
• Red painted finish offers optimal durability, corrosion protection and fade resistance
View Details >>
Additional hydrant marking products:
E-Z Guide Fold-Down Hydrant Markers >>
Hydrant Paint
High-performance acrylic enamel coating is specifically formulated to protect fire hydrants.
Rust-Oleum® 3800 System Acrylic Enamel
Rust-Oleum® 3800 System Acrylic Enamel
• Apply to clean, rusted or galvanized metals
• Resists fading and chalking 2 to 3 times longer than oil-based enamels
View Details >>
Dechlorination Diffusers
Neutralize chlorine in water being discharged from fire hydrants during routine flushing to minimize negative environmental impact.
USABlueBook Aluminum Dechlorination Diffusers
USABlueBook Aluminum Dechlorination Diffusers
• Convenient, easy-to-use tablet feed
• Safely neutralize chlorine/chloramines while flushing hydrants
View Details >>
Additional dechlorination diffuser products:
Zde-Chlorinator Dechlorination Diffusers >>
Norweco Bio-Max Dechlorination Tablets >>
USABlueBook Ascorbic Acid Dechlorination Tablets >>
Hydrant Flushing & Testing
Routine flushing is crucial for removing sediment, debris and potential bacterial contaminants from the water distribution system.
Eclipse 9700 Series Portable Automatic Flushing Hydrants
Eclipse 9700 Series Portable Automatic Flushing Hydrants
• Portable—move from hydrant to hydrant
• Choose from models with or without Bluetooth®
View Details >>
Additional hydrant flushing & testing products:
2-1/2" Flow Testing Diffusers >>
Hydrant Diffusers/Directors >>
Fire Hydrant Pressure Gauges >>
Hydrant Tools
See our great selection of quality tools for operating hydrants and hydrant cap removal.
Adjustable Hydrant Wrenches
Adjustable Hydrant Wrenches
• Best seller—utility quality!
• Extra-long handle for thread protection
View Details >>
Additional hydrant tools products:
Hydrant Buddy Cordless Hydrant & Gate Valve Exercisers >>
USABlueBook Food Grade Anti-Seize >>
Hydrant Repair Kits
We stock a wide selection of Made-in-the-USA hydrant repair parts that are compatible with major hydrant brands and current hydrant designs.
Mueller® Hydrant Extension Kits
Mueller® Hydrant Extension Kits
• High-quality craftsmanship
• Comply with AWWA Standard C-502
View Details >>
We also have Hydrant Extension Kits for the following brands:
American-Darling® >>
Clow >>
M&H >>
Kennedy >>
U.S. Pipe® >>
Waterous® >>
Mueller Hydrant Traffic Repair Kits
Mueller Hydrant Traffic Repair Kits
• Performance guaranteed
• Comply with AWWA Standard C-502
View Details >>
We also have Hydrant Extension Kits for the following brands:
American-Darling >>
Clow >>
M&H >>
Kennedy >>
U.S. Pipe >>
Waterous >>
Heavy-Duty Fiberglass Hydrant Markers
Heavy-Duty Fiberglass Hydrant Markers
• Ultra strong and corrosion resistant
• 3/8" diameter with reflective bands—easy to spot day and night
Heavy-duty hydrant markers feature UV-resistant fiberglass construction for optimal bend strength and corrosion resistance. Select models feature springs for 360º flexibility—a great feature in areas with a lot of children. These specially wound springs return markers to full upright position. Zinc and yellow dichromate spring coating protects against corrosion.
Choose from standard or American flag markers
Standard markers feature red and white reflective shaft bands. Add an optional red mini flag with white reflective tape for added visibility (sold separately; stock # 43657). Mini flags feature UV-protected exterior-grade PVC construction. Mount using the integral screw-tightened clamp. American flag markers add patriotic flare with their red, white and blue reflective shaft bands. Included flag topper features an American flag on one side, and white and blue stripes on the other.
Multiple mounting connection options
Flat bracket mounting connections attach directly to hydrant flange bolts. They feature MIL-SPEC steel construction with poly coating. Loop mounting connections install on hydrant nozzles behind the cap. They require less than 1/2" clearance between cap and hydrant body for a tight fit. Brackets feature a powder-coated enamel finish with poly coating.
Discount with purchase of 10+, 50+ or 100+. Call for details.
Shipping: Additional handling fees apply.
CONNECTION TYPESTOCK #NEW
PRICE
5'H STANDARD MARKERS
Flat Bracket w/ Spring22516$ 29.15
Loop w/ Spring for 2-1/2"4365834.35
Loop w/o Spring for 2-1/2"4365923.49
Loop w/ Spring for 4-1/2"4365636.45
Mini Flag (Optional)4365711.25
7'H STANDARD MARKERS
Flat Bracket w/ Spring22502$ 31.89
Loop w/ Spring for 2-1/2"2250337.49
Loop w/o Spring for 2-1/2"2250425.95
Loop w/ Spring for 4-1/2"2250538.55
Mini Flag (Optional)4365711.25
5'H AMERICAN FLAG MARKERS
Flat Bracket w/ Spring73485$ 46.25
Loop w/ Spring for 2-1/2"7348647.25
USABlueBook Spring Steel Hydrant Markers
USABlueBook Spring Steel Hydrant Markers
• Take abuse and lasts for years
• Red and white reflective bands provide maximum visibility
• Rugged construction takes abuse and lasts for years
Made from a single piece of galvanized spring steel, this marker measures 52" from the base to top of the shaft. Tightly wound spring ensures the marker returns to a vertical position, despite repeated flexing.
Red and white reflective bands on the top 16" offer increased visibility in severe weather and low-light conditions. Optional 4-1/2"Dia circular flag kit available. Kit includes all mounting accessories.
Discount with purchase of 10+, 50+ or 100+. Call for details.
Shipping: Additional handling fees apply. Quantities of 50+ ship motor freight.
DESCRIPTIONSTOCK #NEW
PRICE
Spring Steel Hydrant Marker with Spring and Bracket Mount85960$ 28.95
Optional Circular Flag Kit65949$ 16.69
Steel Hydrant Markers with Flag
Steel Hydrant Markers with Flag
• Maximum quality at minimal cost
Heavy-duty marker measures 4-ft high and features a 3"W x 2-3/4"H flag. Red painted finish offers optimal durability, corrosion protection and fade resistance. Loop mount slips quickly over any 2-1/2" NST outlet, and is held in place by the hydrant cap. Optional white reflective tape sold separately. One roll covers approximately 64 flags.
Discount with purchase of 10+, 50+ or 100+. Call for details.
Shipping: Additional handling fees apply. Quantities of 50+ ship motor freight.
DESCRIPTIONSTOCK #NEW
PRICE
Steel Hydrant Marker with Loop Mount85935$ 27.95
Reflective Tape, 1 x 30' Roll49220$ 19.99
Rust-Oleum® 3800 System Acrylic Enamel
Rust-Oleum® 3800 System Acrylic Enamel
• Apply to clean, rusted or galvanized metals
• Resists fading and chalking 2 to 3 times longer than oil-based enamels
• Water-based formula for easy clean-up
This water-based acrylic enamel outperforms oil-based enamels in corrosion, chemical and weather resistance. It’s ideal for water towers, plant buildings, hydrants, collector shacks, railings, pipe and more. Can be applied to damp surfaces.
Enamel dries fast so you can apply a two-coat system in less than three hours. Apply with brush, roller or spray (thin with water only). One gallon covers 150 to 270 square feet. Low VOC, low odor. Sold in one-gallon containers. Cannot be sold in the South Coast Air Quality Management District.
DESCRIPTIONSTOCK #EACH
OSHA Safety Blue (Med. Blue)401727$ 65.95
OSHA Safety Green40172865.95
OSHA Safety Orange40173165.95
OSHA Safety Red40173265.95
OSHA Safety Yellow40173065.95
Universal Primer33342755.95
USABlueBook Aluminum Dechlorination Diffusers
USABlueBook Aluminum Dechlorination Diffusers
• Convenient, easy-to-use tablet feed
• Safely neutralize chlorine/chloramines while flushing hydrants
Our dechlorination diffuser is for use with chemically treated (10 ppm or less chlorine/chloramines) potable water. It attaches directly to 2-1/2" NST hydrant threads to handle flows from 200 to 1250 gpm at pressures up to 200 psi. Diffuser features sturdy aluminum construction and weighs only 17 lbs.
The diffuser holds nine sodium sulfite tablets or ascorbic acid/vitamin C tablets. During flushing, spot check the tablet consumption approximately every 10,000 gallons of flow.
Customize diffuser with optional accessories
Add the tablet extension tube to load as many as 20 additional tablets to the diffuser feed. The tube features clear Lexan® construction, so you can see the level of the tablets and refill as needed.
We recommend the tablet screen when using ascorbic acid dechlorination tablets. The screen adjusts tablet consumption rate to the proper amount for 0 to 4 ppm chlorine concentration. Add an optional pitot tube assembly with gauge to convert this diffuser into a Dechlorination Diffuser/Flow Tester. It attaches easily with two mounting screws, and features a quick-disconnect connection for the gauge.
Use two low-flow inserts in situations where the flow is less than 200 gpm. These easy-to-install inserts redirect flow through the tablet feed area to ensure adequate exposure to the tablets.
For additional control over discharge, you can connect the diffuser to the hydrant via fire hose or with the steel hitch bracket holder, which lets you direct flow. For higher flow rates, use the hydrant wye to attach two diffusers at once to increase the flow capacity to approximately 2500 gpm.
Note: Pitot tube assembly and gauge are sold separately.
DESCRIPTIONSTOCK #NEW
PRICE
USABlueBook Aluminum Dechlorination Diffuser96741$ 1,229.95
ACCESSORIES
Tablet Extension Tube96748$ 237.49
Tablet Screen9674388.64
Pitot Tube Assembly w/ Gauge96744178.95
4" Glycerin-Filled Gauge, 100 psi9674775.80
Low-Flow Insert (Two Required)96749205.95
Steel Hitch Bracket Holder96742600.00
2-1/2" NST(F) Swivel Connection Hydrant Wye52705233.95
Fire Hose, 2-1/2" M & F NST, 15'L22597229.95
Steel Support Stand83786329.95
DECHLORINATION TABLETS
Norweco® Bio-Max® Dechlorination Tablets, 48-lb Pail28083$ 234.95
USABlueBook Ascorbic Acid Dechlorination Tablets, 35-lb Pail10458634.95
Eclipse 9700 Series Portable Automatic Flushing Hydrants
Eclipse 9700 Series Portable Automatic Flushing Hydrants
• Portable—move from hydrant to hydrant
• Choose from models with or without Bluetooth®
These portable flushing devices move easily from hydrant to hydrant. They come standard with a lockable aluminum enclosure. The perforated floor diffuses flushed water, or remove the floor and redirect flushing water through a hose. Devices thread into a standard 2-1/2" NST inlet for most fire hydrants, but if you have custom threads on your hydrant, adapters are available. Contact USABlueBook for more information.
The 9700 series has several optional accessories. The multidirectional diverter diffuses and sprays the discharge, while the meter stand protects your hydrant’s threads. Dechlorination baskets, security collar locks and sampling bibbs are also available.
Includes: lockable aluminum enclosure with key, 2-1/2" NST swivel connection, security collar lock, solenoid valve and self-contained digital controller.
FLUSHING HYDRANTS
MFR #DESCRIPTIONSTOCK #EACH
9700150 gpm, 2"63223$ 2,869.95
9700A40 gpm, 1"632302,709.95
FLUSHING HYDRANTS W/ BLUETOOTH
MFR #DESCRIPTIONSTOCK #EACH
9700150 gpm, 2"89475$ 2,929.95
9700A40 gpm, 1"894762,769.95
BLUETOOTH RETROFIT KIT
STOCK #EACH
89470$ 369.00
Accessories
DESCRIPTIONSTOCK #EACH
Multidirectional Diverter for 2" Hydrants63224$ 250.00
Multidirectional Diverter for 1" Hydrants63231250.00
Water Meter Stand63225175.00
Security Collar Lock22608181.54
Sampling Point Bibb63227126.00
Spare Key632286.65
9700 Dechlorination Kit for 2" Hydrants63229246.00
9700A Dechlorination Kit for 1" Hydrants63236246.00
Adjustable Hydrant Wrenches
Adjustable Hydrant Wrenches
• Best seller—utility quality!
Extra-long handle support for thread protection. Drilled for lug/rocker style caps. Adjustable handle screws in and out for a tight grip on the pentagon nut. Zinc-chromate plated. Overall length: 20". Weight: 5-1/4 lbs.
DESCRIPTIONSTOCK #NEW
PRICE
Adjustable Hydrant Wrench22512$ 36.95
Hydrant Extension Kits for Mueller®
Hydrant Extension Kits for Mueller®
• In stock for same-day shipping!
These American-made parts are of the highest quality manufactured in state-of-the-art machine shops. The selection below is for Mueller hydrants; however, we also stock extension kits for all major-brand, current-design fire hydrants. All parts are guaranteed by the manufacturer to perform efficiently, and are in full compliance with AWWA Standard C-502.
Shipping: Sizes 2 feet and longer ship motor freight.
4-1/2" Centurion®
Kit includes: stem, barrel, lubricant, steel coupling, flange, gaskets, bolts with nuts, clevis pins and cotter pins.
LENGTHSTOCK #EACH
6"47478$ 521.95
1'47480609.95
1'6"47482663.95
2'47484740.95
4-1/4 to 4-1/2" Improved
Kit includes: threaded stem, barrel, brass coupling, set screw, flange, gaskets, lubricant and bolts with nuts. When ordering, please specify pre-or post-1972 hydrant.
LENGTHSTOCK #EACH
6"47510$ 598.49
1'47512680.95
1'6"47514722.95
2'47516817.95
5-1/4" Improved
Kit includes: threaded stem, barrel, brass coupling, set screw, flange, gaskets, lubricant and bolts with nuts.
LENGTHSTOCK #EACH
6"47526$ 615.95
1'47528746.95
1'6"47530829.95
2'47532941.95
5-1/4" Centurion
Kit includes: stem, barrel, lubricant, steel coupling, flange, gaskets, bolts with nuts, clevis pins and cotter pins.
LENGTHSTOCK #EACH
6"47494$ 574.95
1'47496680.95
1'6"47498769.95
2'47500864.95
2'6"475021,036.95
3'475041,136.95
3'6"475061,244.95
4'475081,350.95
Hydrant Traffic Repair Kits for Mueller®
Hydrant Traffic Repair Kits for Mueller®
• In stock for same-day shipping
• Performance guaranteed
Traffic/safety repair kits feature high-quality parts made in the USA. The selection below includes repair kits for Mueller hydrants, but we also offer kits for the all major brand, current design hydrants. Made in state-of-the-art machine shops by Hydrant Repair Parts, Inc. Kits comply with AWWA Standard C-502.
Post-1972 4-1/2" Centurion®
Includes: safety flange, gasket, bolts with nuts (8), 10-1/2 oz lubricant, steel safety stem coupling, clevis pins (2) and cotter pins (2).
DESCRIPTIONSTOCK #EACH
4-1/2" Centurion Kit for Mueller47256$ 259.95
Pre-1972 4-1/4" Improved; 4-1/2" Improved
Includes: safety flange, gasket, bolts with nuts (8), 10-1/2 oz lubricant, 75/95 brass safety coupling and set screw.
DESCRIPTIONSTOCK #EACH
4-1/4" and 4-1/2" Improved Kit for Mueller47260$ 286.95
Post-1972 5-1/4" Centurion
Includes: safety flange, gasket, bolts with nuts (8), 10-1/2 oz lubricant, 75/95 brass safety coupling and set screw.
DESCRIPTIONSTOCK #EACH
5-1/4" Kit Centurion Kit for Mueller47258$ 272.95
Pre-1972 5-1/4" Improved
Includes: safety flange, gasket, bolts with nuts (8), 10-1/2 oz lubricant, 75/95 brass safety coupling and set screw.
DESCRIPTIONSTOCK #EACH
5-1/4" Improved Kit for Mueller47262$ 291.95