• From your tap to Type I or RO water
• Fits neatly on a lab bench or mounts on a wall
• Visual alarms alert you when maintenance is needed

Turn almost any lab sink into an on-demand ultrapurified water station with these purification systems. For less critical lab applications such as glassware rinsing, the system produces RO-purified water and stores it in a built-in 6-L tank. RO water purity is maintained by recirculating the water in the tank through the pretreatment/reverse osmosis cartridge for three minutes every two hours. Access RO water from the tank outlet valve on the back of the unit.

To make ultrapure 18.2-mΩ Type I water, this system passes the RO water through a deionization cartridge. The optional 0.22 µm final filter (stock # 87928) ensures bacteria and particles over 0.22 µm diameter are removed. Easily access Type I water from the front dispenser.

The color LCD shows operating modes, operating parameters, maintenance or alarm messages and tank level. The control panel lets you quickly set alarm points, volume dispensed and dispensing time for automatic dispensing, flow rate calibration and tank level calibration. Multiple alarms help you easily maintain the unit and the quality of dispensed water.

Includes: 10-ft clear tubing and a 3/8" ID hose barb for the Type I dispensing valve; 8 x 8 mm elbow connector and 3 ft of 8-mm tubing with ball valve for the tank outlet; sanitation kit; and two 1-micron air vent filters. 12 month warranty.

Note: Filter pack (stock # 87926) is required; order separately.

• Feedwater requirements: potable, 4 to 10 pH, 5 to 35°C, free chlorine <1mg/L, TOC < 2000 ppb
• Output rate
  Type I: >0.5 L/min
  RO Water: 3 L/hour
• Output water quality
  Type I: 18.2 MΩ/cm, <10 ppb TOC
  RO Water: 94% conductivity removal from feed water
• Inlet pressure (min/max): 7.3 to 87.0 psi
• Dimensions: 11.4"W x 23.8"H x 13.1"D