Dry Polymer Funnel

Item No.350348
Product Details Part of a two-part polymer disperser; also requires eductor (stock # 350347) Provides economical polymer blending No moving parts to wear out This polymer disperser provides an economical means of blending polymer. Its simple design consists of a 3/4" NPT eductor and a funnel (each s
Price $195.95
price per each
excl. tax
In Stock

Description

Product Details
  • Part of a two-part polymer disperser; also requires eductor (stock # 350347)
  • Provides economical polymer blending
  • No moving parts to wear out

This polymer disperser provides an economical means of blending polymer. Its simple design consists of a 3/4" NPT eductor and a funnel (each sold separately). Just connect your clean water supply to the eductor and pour the dry polymer in the funnel. As water flows through the eductor, a vacuum is created, pulling in the dry polymer.

This polymer disperser can effectively wet 5 pounds of dry polymer for each 10 to 15 gallons of water supplied to the unit. This results in a 4 to 6% concentration of polymer feed. This mixture is then sent to a tank or drum for further mixing until the dry polymer is completely dissolved. For correct operation, you must use water supply pressure from 20 to 100 psi.

For a complete system, order this funnel (stock # 350348) and an eductor (stock # 350347).

Product Information

Item number
350348
Catalog Page
169
Net weight
3
Condition
New

Dry Polymer Funnel

Item number
350348
Catalog Page
169
Net weight
3
Condition
New
Price $195.95
price per each
excl. tax
In Stock
each
Need Help? Call 800-548-1234
Product Details
  • Part of a two-part polymer disperser; also requires eductor (stock # 350347)
  • Provides economical polymer blending
  • No moving parts to wear out

This polymer disperser provides an economical means of blending polymer. Its simple design consists of a 3/4" NPT eductor and a funnel (each sold separately). Just connect your clean water supply to the eductor and pour the dry polymer in the funnel. As water flows through the eductor, a vacuum is created, pulling in the dry polymer.

This polymer disperser can effectively wet 5 pounds of dry polymer for each 10 to 15 gallons of water supplied to the unit. This results in a 4 to 6% concentration of polymer feed. This mixture is then sent to a tank or drum for further mixing until the dry polymer is completely dissolved. For correct operation, you must use water supply pressure from 20 to 100 psi.

For a complete system, order this funnel (stock # 350348) and an eductor (stock # 350347).