Seametrics® 3" iMAG 4700p Flowmeter, VDC Power, 7.9"L, Integral Display
Description
- NSF-61 certified for potable water use
- IP68-rated for installation in flooded and below-grade environments
Measure flow in industrial water, wastewater and pump station applications. These economical meters have no moving or mechanical parts to clog or wear out, making them a perfect alternative to mechanical flowmeters. Units are ideal for tight plumbing installations since they require fewer straight pipe diameters than most comparable meters.
Their multiline alphanumeric LCD screen displays both flow rate and total flow. Setup and programming are easy via two touchsensor keys—just follow the on-screen prompts. Bidirectional flow measurement is standard with forward, reverse and net flow totalization.
VDC-powered meters feature pulse and 4-20 mA analog outputs; external 24-VDC power supply (sold separately) is required for loop powering the 4-20 mA signal. Back-up battery pack (included) provides auxiliary power in the event of a power failure. Features integral display readout and includes 20'L multi-conductor cable for connection of outputs and external power.
Additional options are available, including meters with high-speed digital outputs, 4-20 mA (HART®) outputs, Modbus RTU and 85-264 VAC power supplies. Contact USABlueBook for more information. Note: We recommend using a pair of grounding rings for non-metallic pipe applications (sold separately).
Shipping: Ships by ground only.
- Accuracy: ±0.75% of reading ±0.025% of full scale flow
- GPM: 4.0 to 722
- Length: 7.9"
- Low flow cutoff: 0.5% of max flow rate
- Conductivity: >20 µS/cm (w/ empty pipe detection)
- Power: external 9-36 VDC
- Outputs: 4-20 mA current loop and scaled pulse
- Materials: Body/flow tube: epoxy-coated welded steel; Lining: Texin® flange, polyurethane/Noryl® body; die-cast aluminum electronics housing; 316 stainless steel electrodes
Product Information
- Item number
- 46757
- Brand Name
- Seametrics
- Catalog Page
- 385
- Net weight
- 28
- Condition
- New
Seametrics® 3" iMAG 4700p Flowmeter, VDC Power, 7.9"L, Integral Display
- Item number
- 46757
- Brand Name
- Seametrics
- Catalog Page
- 385
- Net weight
- 28
- Condition
- New
- NSF-61 certified for potable water use
- IP68-rated for installation in flooded and below-grade environments
Measure flow in industrial water, wastewater and pump station applications. These economical meters have no moving or mechanical parts to clog or wear out, making them a perfect alternative to mechanical flowmeters. Units are ideal for tight plumbing installations since they require fewer straight pipe diameters than most comparable meters.
Their multiline alphanumeric LCD screen displays both flow rate and total flow. Setup and programming are easy via two touchsensor keys—just follow the on-screen prompts. Bidirectional flow measurement is standard with forward, reverse and net flow totalization.
VDC-powered meters feature pulse and 4-20 mA analog outputs; external 24-VDC power supply (sold separately) is required for loop powering the 4-20 mA signal. Back-up battery pack (included) provides auxiliary power in the event of a power failure. Features integral display readout and includes 20'L multi-conductor cable for connection of outputs and external power.
Additional options are available, including meters with high-speed digital outputs, 4-20 mA (HART®) outputs, Modbus RTU and 85-264 VAC power supplies. Contact USABlueBook for more information. Note: We recommend using a pair of grounding rings for non-metallic pipe applications (sold separately).
Shipping: Ships by ground only.
- Accuracy: ±0.75% of reading ±0.025% of full scale flow
- GPM: 4.0 to 722
- Length: 7.9"
- Low flow cutoff: 0.5% of max flow rate
- Conductivity: >20 µS/cm (w/ empty pipe detection)
- Power: external 9-36 VDC
- Outputs: 4-20 mA current loop and scaled pulse
- Materials: Body/flow tube: epoxy-coated welded steel; Lining: Texin® flange, polyurethane/Noryl® body; die-cast aluminum electronics housing; 316 stainless steel electrodes