Partech 715 Sludge Watch Portable Sludge Blanket Detector with IR40 Sensor, P230473
Description
- Lightweight and portable-unit with sensor weighs less than 4 lbs
- Audible and visual indicators make operation easy
- Storage reel for easy cable management and simple, sanitary operation
Use the economical Sludge Watch 715 portable sludge blanket detector to spot check sludge interface levels in settling tanks. It works by measuring the change in the level of suspended solids as the IP68-rated PVC sensor is lowered into a tank.
When the sensor reaches the sludge blanket, an audible signal changes from a fast beeping to a slow beeping tone and a red LED provides a visual indication. Rugged sensor cable markings (in one-foot intervals from the sensor) allow you to measure the sludge interface position.
The sludge detector consists of a cable reel and an IR sensor. The cable reel contains all electronics and a replaceable 9V battery, and stores the 33-ft sensor cable when not in use.
- Range (nominal): 0 to 1500 mg/L
- Range (sludge detection): 150 to 1350 mg/L
Product Information
- Item number
- 53547
- Brand Name
- Partech
- Catalog Page
- 1515
- Net weight
- 3.8
- Condition
- New
Partech 715 Sludge Watch Portable Sludge Blanket Detector with IR40 Sensor, P230473
- Item number
- 53547
- Brand Name
- Partech
- Catalog Page
- 1515
- Net weight
- 3.8
- Condition
- New
- Lightweight and portable-unit with sensor weighs less than 4 lbs
- Audible and visual indicators make operation easy
- Storage reel for easy cable management and simple, sanitary operation
Use the economical Sludge Watch 715 portable sludge blanket detector to spot check sludge interface levels in settling tanks. It works by measuring the change in the level of suspended solids as the IP68-rated PVC sensor is lowered into a tank.
When the sensor reaches the sludge blanket, an audible signal changes from a fast beeping to a slow beeping tone and a red LED provides a visual indication. Rugged sensor cable markings (in one-foot intervals from the sensor) allow you to measure the sludge interface position.
The sludge detector consists of a cable reel and an IR sensor. The cable reel contains all electronics and a replaceable 9V battery, and stores the 33-ft sensor cable when not in use.
- Range (nominal): 0 to 1500 mg/L
- Range (sludge detection): 150 to 1350 mg/L