USABlueBook offers a great selection of Seametrics electromagnetic flowmeters and sensors. Electromagnetic flowmeters are available in both insertion and spool types. Rely on these innovative instruments for exceptional accuracy in critical flow measurement applications.
USABlueBook offers a great selection of Seametrics electromagnetic flowmeters and sensors. Electromagnetic flowmeters are available in both insertion and spool types. Rely on these innovative instruments for exceptional accuracy in critical flow measurement applications.
EX150/EX250 models feature bronze or SS isolation valves.
Measure flow rates of clean water, turbid water and water with suspended solids. The liquid must have a minimum conductivity of 20 μS/cm. No moving parts such as rotors or turbines to jam or wear out. These sensors use the principle of Faraday’s Law. A rapidly reversing magnetic field is produced in the lower housing, and as the fluid moves through this field a voltage is generated that is proportional to the flow rate. Use with Seametrics flow monitor/totalizers below to display flow rate and total. Choose from 316 stainless steel or brass sensors.
Includes: EX110 and EX210 sensors include a 1-1/2" NPT(M) installation fitting that threads directly into saddles or threaded weld fittings. EX150 and EX250 hot tap sensors include a 2" NPT(M) isolation valve for hot-tap applications for installation and removal under pressure.
Note: Order service saddle, flow monitor/totalizer and power supply separately. Bidirectional versions are available as special order. Contact USABlueBook for more information.
Seametrics insertion sensors work seamlessly with Seametrics FT4X0, FT520 and FT522 flow monitor/totalizers. External power supply required (sold separately).
external DC power supply (sold separately), 9-36 VDC @ 250 mA max (30 mA average)
Battery-powered:
lithium battery pack with two 3.6V D batteries (included), replaceable
Cable
Meters (all):
20'L, 6 conductor for power & outputs (included)
Meters with remote display:
50'L (for wiring remote display to flow tube)
Operating conditions:
10 to 130°F (-12 to 54°C)
Approvals:
CSA, NSF 61, IP68 (rated continuous under water to depth of 10 feet)
Seametrics® iMAG Magnetic Flowmeters
•
NSF-61 certified for potable water use
•
IP68-rated for installation in flooded and below-grade areas
•
Battery-powered models available for areas without power
Measure flow in industrial water, wastewater and pump station applications. These economical meters have no moving or mechanical parts to clog or wear out, making them a perfect alternative to mechanical flowmeters. Units are ideal for tight plumbing installations since they require fewer straight pipe diameters than most comparable meters.
Their multiline alphanumeric LCD screen displays both flow rate and total flow. Setup and programming are easy via two touch-sensor keys—just follow the on-screen prompts. Bidirectional flow measurement is standard with forward, reverse and net flow totalization.
Choose from VDC- or battery-powered meters. Additional options are available, including meters with high-speed digital outputs, Modbus RTU, integral data loggers, wireless telemetry signal and 85-264 VAC power supplies. Contact USABlueBook for more information. Note: We recommend using a pair of grounding rings for non-metallic pipe applications (sold separately).
Includes: Pair of full-faced gaskets. Shipping: Ships by ground only. 8" meters and larger ship motor freight.
Accuracy:
±0.75% of reading ±0.025% of full scale flow (±1.0% on battery models)
Low flow cutoff:
0.5% of max flow rate
Display:
128 x 64 LCD; 5-digit flow rate, 8-digit total flow
Rate units:
gallons, liters, barrels, cu ft, cu meters, million gallons, mega liters, imperial gallons and million imperial gallons per second/minute/hour/day
external DC power supply (sold separately), 9-36 VDC @ 250 mA max (30 mA average)
Battery-powered:
lithium battery pack with two 3.6V D batteries (included), replaceable
Cable
Meters (all):
20'L, 6 conductor for power & outputs (included)
Meters with remote display:
50'L (for wiring remote display to flow tube)
Operating conditions:
10 to 130°F (-12 to 54°C)
Approvals:
CSA, NSF 61, IP68 (rated continuous under water to depth of 10 feet)
VDC-Powered Meters
Meters feature pulse and 4-20 mA analog outputs; external 24-VDC power supply (sold separately) is required for loop powering the 4-20 mA signal. Back-up battery pack (included) provides auxiliary power if power fails. Available with integral or remote displays.
Meters feature a pulse output. Lithium battery pack (included) provides full-time battery-only power, making these meters ideal for remote installations without power. User-selectable sampling rates allow for up to eight years of continuous battery life. Model # iMAG4700.
