Home
Measure suspended solids and dissolved oxygen with a single device Measure suspended solids and dissolved oxygen with a single device
750w2 Meter with SoliTechw2 IR Suspended Solids Sensor connected
Range
With IR SS sensor: 0 to 30,000 mg/L
With RDO sensor: 0 to 60 mg/L; 0 to 600% saturation
Display: sunlight readable graphical LCD, 7-button keypad
Power: internal rechargeable battery pack
Battery life: one week/200+ uses (typical)
Enclosure: ABS (IP65)
Operating temp: 32 to 140°F
Memory: 500+ data points per sensor
Dimensions: 4.3"W x 8.7"H x 1.5"D
OxyTechw2 RDO Sensor
Partech 750w² Portable Suspended Solids & Water Quality Meters
Measure suspended solids and dissolved oxygen with a single device
Multiple interchangeable sensors
Sunlight-readable display with backlight for use in lower light levels
Choose from interchangeable suspended solids or RDO sensors
Measure TSS, turbidity, dissolved oxygen and sludge level with a single unit. This innovative water quality meter features high accuracy, a simple-to-use interface and interchangeable sensors (sold separately below). Use to test parameters in wastewater plants, rivers, lakes and other aqueous systems—the robust IP65-rated meter housing and military-grade cable connectors make this unit tough enough for rugged field applications.
Includes: battery charger, clear protective meter sleeve and a carrying/storage bag with room for up to two sensors. Sensors are required but not included. Order separately below.
Range
With IR SS sensor: 0 to 30,000 mg/L
With RDO sensor: 0 to 60 mg/L; 0 to 600% saturation
Display: sunlight readable graphical LCD, 7-button keypad
Power: internal rechargeable battery pack
Battery life: one week/200+ uses (typical)
Enclosure: ABS (IP65)
Operating temp: 32 to 140°F
Memory: 500+ data points per sensor
Dimensions: 4.3"W x 8.7"H x 1.5"D
Click on stock # to see pricing
MFR # DESCRIPTION STOCK #
P228531 750w² Meter with Carrying Bag and Charger 53536
Sensors (One Required)
For a complete system, order a 750w² meter and the OxyTechw² RDO sensor and/or SoliTechw² IR suspended solids sensor. Sensors are easily swapped out via the IP68-rated input connector.
SoliTechw² IR Sensors
Use to measure suspended solids or turbidity/sludge density. The two-prong 960 nm light sensor features a rugged acetal co-polymer body that withstands tough conditions found in clarifiers, thickeners and wastewater tanks. Calibration values are stored in memory, so daily recalibration is not required—simply clean the sensor after use. Monthly calibration is sufficient for proper operation. Measure in units of mg/L, g/L %, NTU, FTU, FNU, or FAU.
Click on stock # to see pricing
16’ CABLE
RANGE (mg/L) 16' CABLE
MFR #
MFR # STOCK # 33' CABLE
MFR #
STOCK #
0 to 200 P230502 53540 P230506 53542
0 to 1500 P230503 53541 P230507 53543
0 to 10,000 P230504 53538 P230508 53537
0 to 30,000 P230505 53539 P230509 53544
33' CABLE
RANGE (mg/L) MFR # STOCK #
0 to 200 P230506 53542
0 to 1500 P230507 53543
0 to 10,000 P230508 53537
0 to 30,000 P230509 53544
OxyTechw² RDO Sensors
Sensors use optical DO technology, making them accurate, reliable and EPA approved. These RDO luminescence-quenching sensors do not consume oxygen or require water movement for accurate measurements. The only probe maintenance required is a simple cap replacement approximately every two years.
Click on stock # to see pricing
16' CABLE
RANGE (mg/L) 16' CABLE
MFR #
MFR # STOCK # 33' CABLE
MFR #
STOCK #
0 to 60 P230469 53545 P230470 53546
33' CABLE
RANGE (mg/L) MFR # STOCK #
0 to 200 P230470 53546
Loading...