Vanton Chemical Transfer Pumps, Size 6

Item No.26761
Product Details Engineered for acids, caustics, slurries, viscous fluids Self-priming, run-dry capability No seals, gaskets, check valves or exposed bearings Vanton Flex-i-liner pumps are self-priming and can run dry for extended periods without liner damage. The only wear part is the flexible liner
Price $1079.95
price per each
excl. tax
Call for availability

Description

Product Details
  • Engineered for acids, caustics, slurries, viscous fluids
  • Self-priming, run-dry capability
  • No seals, gaskets, check valves or exposed bearings

Vanton Flex-i-liner pumps are self-priming and can run dry for extended periods without liner damage. The only wear part is the flexible liner, which is designed for long periods of service. An inexperienced operator can replace a liner in a matter of minutes.

Simple design! A rotor mounted on an eccentric shaft oscillates within the liner, creating a progressive squeegee action on the fluid trapped between the liner and the block. The liner and the block are the only components in contact with the fluid. Flex-i-liner lubricant is used in the cavity where the eccentric rotor is in contact with the center of the liner to extend liner life.

Pumps feature polypropylene bodies and Hypalon® liners for excellent resistance to a wide range of acids and alkalis. Bodies of polyethylene, Teflon® and stainless steel are also available, as are liners made of Nordel® (EPDM), Viton®, Teflon, Butyl, neoprene, Buna-N, and natural rubber.

Standard motors are 115V. Metering accuracies of ±5% can be obtained by using variable speed motors with a speed controller.

Tech Specs:
  • Max GPM: 1
  • Suction: 3/4"
  • Discharge: 3/4"
  • Motor: 1/4-hp; 115V

Product Information

Item number
26761
Brand Name
Vanton Pump & Equipment Corp.
Catalog Page
171
Net weight
35.6
Condition
New

Vanton Chemical Transfer Pumps, Size 6

Item number
26761
Brand Name
Vanton Pump & Equipment Corp.
Catalog Page
171
Net weight
35.6
Condition
New
Price $1079.95
price per each
excl. tax
Call for availability
each
Need Help? Call 800-548-1234
Product Details
  • Engineered for acids, caustics, slurries, viscous fluids
  • Self-priming, run-dry capability
  • No seals, gaskets, check valves or exposed bearings

Vanton Flex-i-liner pumps are self-priming and can run dry for extended periods without liner damage. The only wear part is the flexible liner, which is designed for long periods of service. An inexperienced operator can replace a liner in a matter of minutes.

Simple design! A rotor mounted on an eccentric shaft oscillates within the liner, creating a progressive squeegee action on the fluid trapped between the liner and the block. The liner and the block are the only components in contact with the fluid. Flex-i-liner lubricant is used in the cavity where the eccentric rotor is in contact with the center of the liner to extend liner life.

Pumps feature polypropylene bodies and Hypalon® liners for excellent resistance to a wide range of acids and alkalis. Bodies of polyethylene, Teflon® and stainless steel are also available, as are liners made of Nordel® (EPDM), Viton®, Teflon, Butyl, neoprene, Buna-N, and natural rubber.

Standard motors are 115V. Metering accuracies of ±5% can be obtained by using variable speed motors with a speed controller.

Tech Specs:
  • Max GPM: 1
  • Suction: 3/4"
  • Discharge: 3/4"
  • Motor: 1/4-hp; 115V