| Lubricants for Howden Roots™ Blowers |
| • | Offered for specific temperature ranges for maximum protection |
|
| USABlueBook stocks a wide selection of blower lubricants for routine servicing of your gas blower motors. We highly recommend that customers stick with the lubrication recommended by your blower manufacturer. Failure to do so can void your blower warranty. Recommended ambient temperature range is shown where applicable. |
| NEW SumTech® FMG-2 grease is specified for servicing drive end bearings of Howden Roots URAI gas blowers built before 8/1/16 and serial numbers up to but not including 1608A. This NLGI #2 premium grade aluminum complex grease offers 518°F (270°C) drop point temperature range, moisture resistance and good mechanical stability. |
| Important Note: SumTech FMG-2 grease may not be compatible with other greases. You must follow a specific transition process when using SumTech grease for the first time. See the Operators Note below for more information. |
| Shipping: Additional handling fee applies to 5-gallon sizes. |
| Click on stock #s to view prices. |
| DESCRIPTION | SIZE | AMBIENT TEMP
RANGE | STOCK # | | GREASE LUBRICANTS FOR HOWDEN ROOTS BLOWERS | | SumTech FMG-2 Complex | 14-oz Tube | — | 303650* | | Synthetic | 14-oz Tube | — | 74833** | | Synthetic | 5 Gallons | — | 74839** | | | | OIL LUBRICANTS FOR HOWDEN ROOTS BLOWERS | | ISO 150 | 1 Quart | 0 to 32°F | 49141 | | ISO 150 | 1 Gallon | 0 to 32°F | 75635 | | ISO 150 | 5 Gallons | 0 to 32°F | 75636 | | | | ISO 220 | 1 Quart | 32 to 90°F | 49071 | | ISO 220 | 1 Gallon | 32 to 90°F | 49073 | | ISO 220 | 5 Gallons | 32 to 90°F | 75637 | | | | ISO 320 | 1 Quart | 90°F+ | 49142 | | ISO 320 | 1 Gallon | 90°F+ | 75638 | | ISO 320 | 5 Gallons | 90°F+ | 75639 | | | *For use with Howden Roots URAI blowers built before 8/1/16 and serial numbers up to but not including 1608A. | **For use with Howden Roots URAI blowers built on or after 8/1/16 and serial numbers beginning with 1608A and higher. |
|
Operators Note:
Important Information Re SumTech FMG-2 Complex Grease First-Time Use | | When using SumTech FMG-2 complex grease in an application as a replacement for a different product, you must follow a specific process to ensure complete removal of the previous product. This information is available on the product page for 303650, under the link Documents/Specifications |
|
|
Product Questions?
|
