<< New Products
Rust-Oleum® 3800 System Acrylic Enamel
Color Selection Guide for Rust-Oleum® Paint Systems
Dunes Tan
Forest Green
Gloss Black
Navy Gray
OSHA Safety Blue
OSHA Safety Green
OSHA Safety Orange
OSHA Safety Red
OSHA Safety Yellow
Silver Gray
Universal Primer
White
Note: Color reproductions may not be exact. Color names may differ between systems. Custom colors available upon request; 12 gallon minimum order. Contact USABlueBook for more information.
Rust-Oleum Logo
Rust-Oleum® 3800 System Acrylic Enamel
•Apply to clean, rusted or galvanized metals
•Resists fading and chalking 2 to 3 times longer than oil-based enamels
•Water-based formula for easy clean-up
This water-based acrylic enamel outperforms oil-based enamels in corrosion, chemical and weather resistance. It’s ideal for water towers, plant buildings, hydrants, collector shacks, railings, pipe and more. Can be applied to damp surfaces.
Enamel dries fast so you can apply a two-coat system in less than three hours. Apply with brush, roller or spray (thin with water only). One gallon covers 150 to 270 square feet. Low VOC, low odor. Sold in one-gallon containers. Cannot be sold in the South Coast Air Quality Management District.
Click on stock #s to view prices.
DESCRIPTIONSTOCK #
Dunes Tan401733
Forest Green401729
Gloss Black401734
Navy Gray401735
OSHA Safety Blue (Med. Blue)401727
OSHA Safety Green401728
OSHA Safety Orange401731
OSHA Safety Red401732
OSHA Safety Yellow401730
Silver Gray401736
White401737
Universal Primer333427
Product Questions?
Rust-Oleum® High-Performance S60 Two-Step System Water-Based Epoxy Kits
Stone Gray
Black
White
Red
Yellow
Blue
Rust-Oleum® High-Performance S60 Two-Step System Water-Based Epoxy Kits
•Ideal for harsh environments
•Very low odor and dries fast
•Apply to sound rusted steel, galvanized steel, aluminum, concrete and masonry
This two-component low-VOC coating combines the performance of a solvent-based epoxy in a convenient water-based epoxy primer and finish coat system. It dries fast and cleans up with soap and water. The coating is very low odor during application, so it is ideal for use anywhere odors are an issue.
Once the activator is added, you have 3 to 8 hours to apply the coating before it starts to set. An activated gallon covers 200 to 350 square feet. Cannot be sold in the South Coast Air Quality Management District.
Note: This is a two-part system. Each kit contains a short filled gallon of base component (Part 2) and a short filled gallon of activator (Part 1). Combine to equal one activated gallon. Premix the base before adding the activator.
Click on stock #s to view prices.
DESCRIPTIONSTOCK #
Stone Gray Kit401738
Black Kit401742
White Kit401741
Red Kit401739
Yellow Kit401740
Blue Kit401743
Product Questions?
We carry many other Rust-Oleum paints and coatings. View our full selection >>