Seametrics® Insertion Electromagnetic Flowmeter (SS), 3 to 10" Pipe, EX110S
Description
- No moving parts to wear out or jam
- Measure flow of clean or dirty water
- Certified to NSF/ANSI Standard 61 and NSF 372
Measure flow rates of clean water‚ turbid water and water with suspended solids. The liquid must have a minimum conductivity of 20 µS/cm. No moving parts such as rotors or turbines to jam or wear out. These sensors use the principle of Faraday's Law. A rapidly reversing magnetic field is produced in the lower housing‚ and as the fluid moves through this field a voltage is generated that is proportional to the flow rate. Use with SeaMetrics FT420 flow monitor/totalizers to display flow rate and total.
Includes: a 1-1/2" NPT(M) installation fitting that threads directly into saddles or threaded weld fittings.
Note: Order service saddle‚ flow monitor/totalizer and power supply separately. Bi-directional versions are available as special order. Contact USABlueBook for more information.
- Accuracy: 1% of full scale
- Fluid velocity range: 0.2 to 20 fps
- Output: square wave pulse‚ opto isolated
- Materials: 316 SS (body); Hastelloy (electrode); PVDF (electrode plate)
- Maximum pressure: 200 psi; Operating conditions: 32 to 200°F (fluid)
Product Information
- Item number
- 11739
- Brand Name
- Seametrics
- Catalog Page
- 407
- Net weight
- 4.8
- Condition
- New
Seametrics® Insertion Electromagnetic Flowmeter (SS), 3 to 10" Pipe, EX110S
- Item number
- 11739
- Brand Name
- Seametrics
- Catalog Page
- 407
- Net weight
- 4.8
- Condition
- New
- No moving parts to wear out or jam
- Measure flow of clean or dirty water
- Certified to NSF/ANSI Standard 61 and NSF 372
Measure flow rates of clean water‚ turbid water and water with suspended solids. The liquid must have a minimum conductivity of 20 µS/cm. No moving parts such as rotors or turbines to jam or wear out. These sensors use the principle of Faraday's Law. A rapidly reversing magnetic field is produced in the lower housing‚ and as the fluid moves through this field a voltage is generated that is proportional to the flow rate. Use with SeaMetrics FT420 flow monitor/totalizers to display flow rate and total.
Includes: a 1-1/2" NPT(M) installation fitting that threads directly into saddles or threaded weld fittings.
Note: Order service saddle‚ flow monitor/totalizer and power supply separately. Bi-directional versions are available as special order. Contact USABlueBook for more information.
- Accuracy: 1% of full scale
- Fluid velocity range: 0.2 to 20 fps
- Output: square wave pulse‚ opto isolated
- Materials: 316 SS (body); Hastelloy (electrode); PVDF (electrode plate)
- Maximum pressure: 200 psi; Operating conditions: 32 to 200°F (fluid)