Seametrics Insertion Electromagnetic Hot Tap Flowmeter (Brass with Bronze Ball Valve), 3 to 10" Pipe, EX150B
Item No.12004
Product Details No moving parts to wear out or jam Measure flow of clean or dirty water Measure flow rates of clean water‚ turbid water and water with suspended solids. The liquid must have a minimum conductivity of 20 µS/cm. No moving parts such as rotors or turbines to jam or wear out.
Price $2157
price per each
excl. tax
In Stock
Description
Product Details
- No moving parts to wear out or jam
- Measure flow of clean or dirty water
Measure flow rates of clean water‚ turbid water and water with suspended solids. The liquid must have a minimum conductivity of 20 µS/cm. No moving parts such as rotors or turbines to jam or wear out. These sensors use the principle of Faraday’s Law. A rapidly reversing magnetic field is produced in the lower housing‚ and as the fluid moves through this field a voltage is generated that is proportional to the flow rate. Use with SeaMetrics FT420 flow monitor/totalizers to display flow rate and total. Includes: a 2" NPT(M) isolation valve for hot-tap applications or installation and removal under pressure. Note: Order service saddle‚ flow monitor/totalizer and power supply separately. Bi-directional versions are available as special order. Contact USABlueBook for more information. Per the Federal Reduction of Lead in Drinking Water Act – this item cannot be used in potable (drinking) water applications
Tech Specs:
- Accuracy: 1% of full scale
- Fluid velocity range: 0.2 to 20 fps
- Output: square wave pulse‚ opto isolated
- Materials: Brass (body); Bronze (isolation valve); Hastelloy (electrode); PVDF (electrode plate)
- Maximum pressure: 200 psi; Operating conditions: 32 to 200°F (fluid)
Product Information
- Item number
- 12004
- Brand Name
- Seametrics
- Catalog Page
- 407
- Net weight
- 11.08
Seametrics Insertion Electromagnetic Hot Tap Flowmeter (Brass with Bronze Ball Valve), 3 to 10" Pipe, EX150B
- Item number
- 12004
- Brand Name
- Seametrics
- Catalog Page
- 407
- Net weight
- 11.08
Price $2157
price per each
excl. tax
In Stock
each
Need Help? Call 800-548-1234
Product Details
- No moving parts to wear out or jam
- Measure flow of clean or dirty water
Measure flow rates of clean water‚ turbid water and water with suspended solids. The liquid must have a minimum conductivity of 20 µS/cm. No moving parts such as rotors or turbines to jam or wear out. These sensors use the principle of Faraday’s Law. A rapidly reversing magnetic field is produced in the lower housing‚ and as the fluid moves through this field a voltage is generated that is proportional to the flow rate. Use with SeaMetrics FT420 flow monitor/totalizers to display flow rate and total. Includes: a 2" NPT(M) isolation valve for hot-tap applications or installation and removal under pressure. Note: Order service saddle‚ flow monitor/totalizer and power supply separately. Bi-directional versions are available as special order. Contact USABlueBook for more information. Per the Federal Reduction of Lead in Drinking Water Act – this item cannot be used in potable (drinking) water applications
Tech Specs:
- Accuracy: 1% of full scale
- Fluid velocity range: 0.2 to 20 fps
- Output: square wave pulse‚ opto isolated
- Materials: Brass (body); Bronze (isolation valve); Hastelloy (electrode); PVDF (electrode plate)
- Maximum pressure: 200 psi; Operating conditions: 32 to 200°F (fluid)