IP810P-04 Battery-Powered Flow Sensor Paddlewheel, PVC Body, 1/2"-3"
Description
- Sensor automatically sets to correct pipe placement within custom installation fitting
- Flow velocity range of 0.3 to 30 ft/sec
These paddlewheel flow sensors operate as part of a proprietary system that makes installation a breeze. Just insert the sensor into the custom installation fitting (sold separately), and install on your pipe. Sensor and fitting are sized exactly to the pipe; no worrying about making the right adjustment. Enter the K factor displayed on your fitting into a Seametrics flow monitor (sold separately below) and you're ensured of maximum accuracy, with no variables to adjust for.
These sensors are suitable for a variety of pipe sizes, and across a wide range of velocities. They can even be used with slightly turbid gray water, but are not recommended for wastewater. Durable construction ensures years of trouble-free service.
Micro-powered flow sensors are for use with FT450 flow monitors/totalizers. Perfect for remote locations, the FT450's internal battery supplies power to the sensor.
Materials: PVC body, nickel-bound tungsten carbide shaft, PVDF rotor, ruby jewel bearings, EPDM O-rings and 18'L AWG 22, 4 conductor sensor cable.
- Pipe Size: 1/2 to 3"
- Accuracy: ±1.5% of full scale
- Output: Hall effect sensor, 12-VDC current sinking pulse
- Maximum pressure: 175 psi
- Maximum temperature: 130°F
Product Information
- Item number
- 11730
- Brand Name
- Seametrics
- Catalog Page
- 411
- Net weight
- 0.8
- Condition
- New
IP810P-04 Battery-Powered Flow Sensor Paddlewheel, PVC Body, 1/2"-3"
- Item number
- 11730
- Brand Name
- Seametrics
- Catalog Page
- 411
- Net weight
- 0.8
- Condition
- New
- Sensor automatically sets to correct pipe placement within custom installation fitting
- Flow velocity range of 0.3 to 30 ft/sec
These paddlewheel flow sensors operate as part of a proprietary system that makes installation a breeze. Just insert the sensor into the custom installation fitting (sold separately), and install on your pipe. Sensor and fitting are sized exactly to the pipe; no worrying about making the right adjustment. Enter the K factor displayed on your fitting into a Seametrics flow monitor (sold separately below) and you're ensured of maximum accuracy, with no variables to adjust for.
These sensors are suitable for a variety of pipe sizes, and across a wide range of velocities. They can even be used with slightly turbid gray water, but are not recommended for wastewater. Durable construction ensures years of trouble-free service.
Micro-powered flow sensors are for use with FT450 flow monitors/totalizers. Perfect for remote locations, the FT450's internal battery supplies power to the sensor.
Materials: PVC body, nickel-bound tungsten carbide shaft, PVDF rotor, ruby jewel bearings, EPDM O-rings and 18'L AWG 22, 4 conductor sensor cable.
- Pipe Size: 1/2 to 3"
- Accuracy: ±1.5% of full scale
- Output: Hall effect sensor, 12-VDC current sinking pulse
- Maximum pressure: 175 psi
- Maximum temperature: 130°F