|
|
|
USABlueBook Aluminum Dechlorination Diffusers |
• | Convenient, easy-to-use tablet feed | • | Safely neutralize chlorine/chloramines while flushing hydrants |
| Our dechlorination diffuser is for use with chemically treated (10 ppm or less chlorine/chloramines) potable water. It attaches directly to 2-1/2" NST hydrant threads to handle flows from 200 to 1250 gpm at pressures up to 200 psi. Diffuser features sturdy aluminum construction and weighs only 17 lbs. | The diffuser holds nine sodium sulfite tablets or ascorbic acid/vitamin C tablets. During flushing, spot check the tablet consumption approximately every 10,000 gallons of flow. A selection of tablets is listed below. | Customize diffuser with optional accessories | Add the tablet extension tube to load as many as 20 additional tablets to the diffuser feed. The tube features clear Lexan® construction, so you can see the level of the tablets and refill as needed. | We recommend the tablet screen when using ascorbic acid dechlorination tablets. The screen adjusts tablet consumption rate to the proper amount for 0 to 4 ppm chlorine concentration. Add an optional pitot tube assembly with gauge to convert this diffuser into a Dechlorination Diffuser/Flow Tester. It attaches easily with two mounting screws, and features a quick-disconnect connection for the gauge. | Use two low-flow inserts in situations where the flow is less than 200 gpm. These easy-to-install inserts redirect flow through the tablet feed area to ensure adequate exposure to the tablets. | For additional control over discharge, you can connect the diffuser to the hydrant via fire hose or with the steel hitch bracket holder, which lets you direct flow. For higher flow rates, use the hydrant wye to attach two diffusers at once to increase the flow capacity to approximately 2500 gpm. All items are sold separately below. | Note: Pitot tube assembly and gauge are sold separately. | Click on stock #s to view pricing. |
DESCRIPTION | STOCK # | USABlueBook Aluminum Dechlorination Diffuser | 96741 | | | ACCESSORIES | Tablet Extension Tube | 96748 | Tablet Screen | 96743 | | | Pitot Tube Assembly w/ Gauge | 96744 | 4" Glycerin-Filled Gauge, 100 psi | 96747 | | | Low-Flow Insert (Requires Two) | 96749 | Steel Hitch Bracket Holder | 96742 | 2-1/2" NST(F) Swivel Connection Hydrant Wye | 52705 | Fire Hose, 2-1/2" M & F NST, 15'L | 22597 | | | Steel Support Stand | 83786 | | | DECHLORINATION TABLETS | Bio-Max Dechlorination Tablets, 48-lb Pail | 28083* | USABlueBook Ascorbic Acid Dechlorination Tablets, 35-lb Pail | 10458** | | | *Shipping: Quantities of 3+ ship motor freight. | **Requires use with Tablet Screen (stock # 96743). |
|
|
|
Eclipse 9700 Series Portable Automatic Flushing Hydrants |
• | Portable—move from hydrant to hydrant | • | Choose from models with or without Bluetooth® |
| These portable flushing devices move easily from hydrant to hydrant. They come standard with a lockable aluminum enclosure. The perforated floor diffuses flushed water, or remove the floor and redirect flushing water through a hose. Devices thread into a standard 2-1/2" NST inlet for most fire hydrants, but if you have custom threads on your hydrant, adapters are available. Contact USABlueBook for more information. | The 9700 series has several optional accessories. The multidirectional diverter diffuses and sprays the discharge, while the meter stand protects your hydrant’s threads. Dechlorination baskets, security collar locks and sampling bibbs are also available. | Includes: lockable aluminum enclosure with key, 2-1/2" NST swivel connection, security collar lock, solenoid valve and self-contained digital controller. | Click on stock #s to view pricing. |
MFR # | DESCRIPTION | FLUSHING HYDRANTS STOCK # | FLUSHING HYDRANTS W/ BLUETOOTH STOCK # | BLUETOOTH RETROFIT KIT (CONTROLLER ONLY) STOCK # | 9700 | 150 gpm, 2" | 63223 | 89475 | 89470 | 9700A | 40 gpm, 1" | 63230 | 89476 | 89470 | |
|
FLUSHING HYDRANTS | | MFR # | DESCRIPTION | STOCK # | 9700 | 150 gpm, 2" | 63223 | 9700A | 40 gpm, 1" | 63230 | |
|
FLUSHING HYDRANTS W/ BLUETOOTH | | MFR # | DESCRIPTION | STOCK # | 9700 | 150 gpm, 2" | 89475 | 9700A | 40 gpm, 1" | 89476 | |
|
BLUETOOTH RETROFIT KIT | | DESCRIPTION | STOCK # | Bluetooth Retrofit Kit | 89470 | |
| Accessories |
DESCRIPTION | STOCK # | Multidirectional Diverter for 2" Hydrants | 63224 | Multidirectional Diverter for 1" Hydrants | 63231 | Water Meter Stand | 63225 | Security Collar Lock | 22608 | | | Sampling Point Bibb | 63227 | Spare Key | 63228 | 9700 Dechlorination Kit for 2" Hydrants | 63229 | 9700A Dechlorination Kit for 1" Hydrants | 63236 |
|
|
|
2-1/2" Flow Testing Diffusers |
• | 360° orientation to direct discharge | • | Quick disconnect fittings for gauges | • | Lightweight aluminum construction |
| This 2-1/2" flow testing diffuser with pitot assembly makes flow testing and hydrant flushing quick and easy, while keeping you and your surroundings dry. The diffuser rotates 360° so the water discharge can flow to a safe, convenient location. Built-in baffle reduces the pressure of the spray. | The pitot assembly consists of a 3-way valve, snubber and pitot tube, all made from brass for corrosion resistance. The 4" sub-zero glycerin-filled gauge is designed for extreme conditions and use. The lightweight aluminum diffuser plus pitot assembly only weighs 7 lbs. Choose from 100 or 160 psi ranges. | Includes: diffuser, 4" glycerin-filled gauge, 1/4" snubber, 1/4" 3-way valve and 1/4" pitot tube. Kit also includes: hard-shell carrying case. | Click on stock #s to view pricing. |
DESCRIPTION | STOCK # | DIFFUSERS (DO NOT INCLUDE CARRYING CASE) | 2-1/2" Flow Tester Diffuser with 100 psi Gauge | 96736 | 2-1/2" Flow Tester Diffuser with 160 psi Gauge | 96737 | | | DIFFUSER KITS (INCLUDE CARRYING CASE) | 2-1/2" Flow Testing Diffuser Kit with 100 psi Gauge | 96738 | 2-1/2" Flow Testing Diffuser Kit with 160 psi Gauge | 96739 | | | REPLACEMENT ITEMS & ACCESSORIES | 4" Gauge, 100 psi/1680 gpm | 53148 | 4" Gauge, 160 psi/2120 gpm | 53147 | 1/4" Pitot Tube Only | 53150 | 1/4" Pitot Tube, Valve & Snubber Assembly | 53149 | | | Hard-Shell Carrying Case | 96756 |
|
|
|
ZDe-Chlorinator Dechlorination Diffusers |
• | The perfect solution for fast, easy, low-cost hydrant flushing | • | Made from high-strength lightweight aircraft-grade 6061-T6 aluminum | • | Use with standard 2-5/8" dechlorination tablets |
| ZDe-Chlorinators offer clean, safe, environmentally friendly water dechlorination. Choose from ultra-compact NEMA 200B units, inline NEMA 200C units, standard NEMA 200 units or advanced NEMA 100 units. All attach directly to 2-1/2" NST hydrant threads for potable water dechlorination at flows of 200 to 900 gpm, and chlorine levels up to 3 ppm. Units hold 3 to 4 dechlorination tablets. Optional tablet extension tubes allow a total capacity of up to 10 tablets; sold separately. | Need added flexibility and expanded flow capabilities? | NEMA 100 diffusers include a removable 45° elbow on the discharge end (2-1/2" NST)—perfect for easy attachment of hose and alternate diffusers (see accessories listed below). All items sold separately. | For flows below 200 gpm, simply remove the NEMA 100’s inlet screen. For flows from 900 to 1200 gpm, order the optional NEMA 400 diffuser (stock # 31119). It features an extra-large face, 2-1/2" NST threaded swivel connection and removable internal screen. | Click on stock #s to view pricing. |
MFR # | DESCRIPTION | FLOW RATING | WEIGHT | STOCK # | NEMA 200B | Dechlorination Diffuser | 200 to 900 gpm | 7 lbs | 31117 | NEMA 200C | Dechlorination Diffuser | 200 to 900 gpm | 7 lbs | 31321 | NEMA 200 | Dechlorination Diffuser | 200 to 900 gpm | 10 lbs | 31116 | NEMA 100 | Dechlorination Diffuser | 1 to 900 gpm | 12 lbs | 31115* | | |
| Accessories |
MFR # | DESCRIPTION | STOCK # | NEMA 400 | NEMA 400 Diffuser for NEMA 100 Diffusers | 31119 | V320-NEMA100-ET | Tablet Extension Tube for NEMA 100 & 200 Diffusers | 31308 | V320-NEMA200B-ET | Tablet Extension Tube for NEMA 220B & 200C Diffusers | 31309 | | | — | Bio-Max Dechlorination Tablets, 48-lb Pail | 28083** | — | USABlueBook Ascorbic Acid Tablets, 10-lb Pail | 10457 | — | Fire Hose, 2-1/2" M & F NST, 15'L | 22597 | — | Aluminum Swivel Adapter for NEMA 200C, 2-1/2" NST(F) x 2-1/2" NPT(M) | 52529 | | | *Flow rating extends to 1200 gpm w/ optional NEMA 400 diffuser (stock # 31119). | **Shipping: Additional shipping fees apply. |
|
|
|
USABlueBook Universal Liquid Chlorinator/Dechlorinators |
• | Cost-effective, time-saving device | • | Attach directly to a fire hydrant or flushing diffuser |
| Use this handy multitasking device for liquid chlorinating/dechlorinating, and also as a flow testing diffuser when used with a Hydro-Hitch™ Water Diffuser. Connect it directly to a 2-1/2" NST fire hydrant port or in-line to a flushing diffuser. | Dechlorination | When using as a dechlorinator, it’s easy to adjust the amount of liquid dechlor—simply turn the thumb knob on the acrylic flow meter up or down while observing the scale. Suction flow rates of liquid dechlor range between 0.05 and 0.5 gpm. Within this range you can easily neutralize up to 50 ppm of chlorine. This device comes with two 2-1/2" glycerin-filled gauges with quick disconnects. The gauges monitor inlet and discharge pressures to ensure optimal Venturi performance. | Save time and money in the field by dechlorinating and flow testing your hydrants at the same time. Simply connect this universal liquid device to the Hydro-Hitch Water Diffuser (stock # 63285) and you can perform both tasks at once. | Chlorination | You can also use this device to inject chlorine into water lines. For a hydrant connection, use a swivel adapter (sold separately below) to connect the male outlet end of the device to the 2-1/2" hydrant port. | Click on stock #s to view pricing. |
DESCRIPTION | STOCK # | Universal Liquid Chlorinator/Dechlorinator | 96735 | | | ACCESSORIES | Hydro-Hitch with Pitot Assembly, 5" Storz | 63285 | Replacement Gauge, 160 psi | 96733 | 2-1/2" NST (F x F) Brass Swivel Adapter | 63453 | Captor® Calcium Thiosulfate Solution, 5 Gallons | 28816* | | | *Shipping: Quantities of 1 or 2 ship via small parcel carrier. |
|
|
|
Captor® Calcium Thiosulfate Solution |
• | Non-hazardous dechlorinating liquid | • | NSF approved |
| When used with USABlueBook Universal Liquid Chlorinator/Dechlorinators (stock # 96735), Mazzei dechlorination system or the liquid version Bazooka®, Captor is perfect for dechlorinating newly installed water mains with higher chlorine residuals. NSF approved for contact with potable water systems. Non-hazardous, ready-to-use formulation with a pH of 6.5 to 7.5 and little or no odor. | How much to use? For every 1 million gallons of water with a 7.0 pH and a 50 ppm chlorine residual, it takes roughly 250 gallons of Captor to completely remove the chlorine. Whether you’re flushing a newly installed water main or just doing routine seasonal hydrant flushing, Captor will work for you. | Shipping: Ships motor freight. | Click on stock #s to view pricing. |
SIZE | STOCK # | 5 Gallons | 28816* | 15 Gallons | 28817 | 30 Gallons | 28818 | 55 Gallons | 28819 | | | *Shipping: Quantities of 1 to 2 ship FedEx. |
|
|
|
Norweco® Bio-Max® Dechlorination Tablets | A safer alternative for dechlorination! These inexpensive concentrated tablets provide a consistent release of sodium sulfite in response to water velocity. Use with all major brands of gravity or pressurized tablet feeders. A single 140 gram Bio-Max tablet removes 1 ppm chlorine from over 19,000 gallons of water or wastewater. |
Active ingredient: | 95% sodium sulfite | Size: | 2-5/8"Dia tablets | pH: | alkaline | Color: | blue-green | Odor: | slight herbal |
| Click on stock # to view pricing. |
SIZE | STOCK # | 48-lb Pail | 28083* | | | *Shipping: Additional shipping fees apply. |
|
|
|
USABlueBook Ascorbic Acid Dechlorination Tablets | Eliminate chlorine residual while retaining dissolved oxygen levels. Use for in-line flushing of municipal water and super-chlorinated water, hydrant flushing, and dechlorination near environmentally sensitive surface water. Compatible with all hydrant flushers and feeders. | Note: When used with USABlueBook Dechlorination Diffusers above, these tablets require a Tablet Screen (stock # 96743). |
Active ingredient: | 75% ascorbic acid | Size: | 2-5/8"Dia tablets | pH: | 1% aqueous solution, pH 2 to 3 | Color: | orange | Odor: | slight citrus |
| Click on stock # to view pricing. |
SIZE | STOCK # | 35-lb Pail | 10458* | | | *Shipping: Additional shipping fees apply. |
|
|
|
Hydrant Diffusers/Directors |
• | Compact and lightweight |
| 2" barrel widens to 3" which diffuses water to a fine spray without an internal screen. Fits 2-1/2" NST and rotates 360°. Installs hand tight. Brass gland diffusers have pin lugs. Works best at 60 psi and over. | Click on stock # to view pricing. |
DESCRIPTION | STOCK # | 2-1/2" NST Steel Hydrant Diffuser | 17593 |
|
|
|
Fire Hydrant Pressure Gauges |
• | Nonfreezing glycerin-filled gauge | • | Quick-disconnect fitting allows easy attachment |
| This fire hydrant pressure gauge is fast and easy to use. Simply thread the cap onto the hydrant, then use the quick-connect fitting to connect the three-way valve assembly and gauge to the cap. Orient the gauge to make it easier to read while on the hydrant. Pin lugs provide an easy grip for a spanner wrench. 2-1/2" NST connection. | Click on stock #s to view pricing. |
DESCRIPTION | STOCK # | REPLACEMENT GAUGE | Fire Hydrant Pressure Gauge, 100 psi | 92001 | 92003 | Fire Hydrant Pressure Gauge, 200 psi | 92002 | 92004 |
|
|
|
A safer, easier solution to hydrant flushing and valve exercising | Hydrant Buddy Cordless Hydrant & Gate Valve Exercisers |
• | Powerful, lightweight and portable | • | Reduce injuries and increase productivity | • | Custom engineered gearbox |
| The cordless Hydrant Buddy makes flushing hydrants easier while increasing productivity and reducing the risk of potential injuries. It weighs only 23 lbs, which minimizes operator fatigue. | The variable-speed Milwaukee® industrial motor and custom-engineered gearbox deliver up to 400 ft-lbs of torque. You can exercise approximately 15 to 20 hydrants before the battery needs a quick 30-minute charge. | The Hydrant Buddy also operates gate valves—simply attach one of the optional adjustable gate valve keys. It can also be adapted for different sizes and styles of operating nuts. All accessories are sold separately. | Includes: charger, two rechargeable batteries, adjustable pentagon socket and heavy-duty metal storage box. 3-year warranty. | Click on stock #s to view pricing. |
DESCRIPTION | STOCK # | Hydrant Buddy Cordless Hydrant & Gate Valve Exerciser | 65511 | | | ACCESSORIES | Adjustable Gate Valve Key, 11'L | 65512 | Adjustable Gate Valve Key, 6'L | 65557 | | | 3/4" Female to 1" Male Adapter | 22191 | 3-Point Adjustable Socket | 22192 | 1-1/4" 4-Point Socket | 22193 | 5-Point Adjustable Socket | 22194 | 2" Square Socket | 22179 |
|
|
|
Adjustable Hydrant Wrenches |
• | Utility quality | • | Best seller |
| Extra-long handle support for thread protection. Drilled for lug/rocker style caps. Adjustable handle screws in and out for a tight grip on the pentagon nut. Zinc-chromate plated. Overall length: 20". Weight: 5-1/4 lbs. | Click on stock # to view pricing. |
DESCRIPTION | STOCK # | Adjustable Hydrant Wrench | 22512 |
|
|
|
USABlueBook Food Grade Anti-Seize |
• | Prevents seizing, galling, rust and corrosion on threads | • | Complies with 21 CFR, parts 170-190 as food-safe |
| Use on all types of metal threads. Water-resistance properties make it ideal for fittings in water line applications. Use on hydrant threads to make cap removal easy, even after extended periods of time. Temperature range of -40 to 1000°F. Includes a brush-top cap. | Click on stock #s to view pricing. |
DESCRIPTION | STOCK # | Food Grade Anti-Seize, 8 oz | 13921 | Food Grade Anti-Seize, 1 lb | 13922 |
|
|