ifm Magnetic Inductive Flow Meter Dual Analog Output, 0-26.4GPM
Description
- Monitors conductive liquids >20 micro siemens/cm
- Compact design allows low-profile installation
- High-accuracy readings in less than 0.15 seconds
Use these compact low-profile flowmeters to measure a variety of conductive fluids >20 micro siemens/cm. Applications include industrial water, potable water, water-based coolants, and water/glycol mixtures.
Flowmeters feature a four-digit display with integrated LEDs to indicate the current display mode. Easily monitor flow rate (gal/min or l/min), total volume (gallons or liters), and temperature (°F or °C). Programming buttons located on the front of the unit allow easy setup and output selection. Each meter has two outputs.
Dual-analog flowmeters allow you to capture temperature and flow rate simultaneously.
To connect the meter to your process line, order the required adapters (pack of 2; sold separately – see stock # 61127). A 16' cable with M12 DC four-pin adapter (stock # 43299) is also required.
- Flow Range: 0.10 to 26.4
- Resolution Flow/Tempurature: 0.05 gpm/0.1°F
- Accuracy: ± (2% of reading + 0.5% of full scale)
- Max pressure: 232 psi (16 bar)
Product Information
- Item number
- 62444
- Brand Name
- ifm Efector
- Net weight
- 2
- Condition
- New
ifm Magnetic Inductive Flow Meter Dual Analog Output, 0-26.4GPM
- Item number
- 62444
- Brand Name
- ifm Efector
- Net weight
- 2
- Condition
- New
- Monitors conductive liquids >20 micro siemens/cm
- Compact design allows low-profile installation
- High-accuracy readings in less than 0.15 seconds
Use these compact low-profile flowmeters to measure a variety of conductive fluids >20 micro siemens/cm. Applications include industrial water, potable water, water-based coolants, and water/glycol mixtures.
Flowmeters feature a four-digit display with integrated LEDs to indicate the current display mode. Easily monitor flow rate (gal/min or l/min), total volume (gallons or liters), and temperature (°F or °C). Programming buttons located on the front of the unit allow easy setup and output selection. Each meter has two outputs.
Dual-analog flowmeters allow you to capture temperature and flow rate simultaneously.
To connect the meter to your process line, order the required adapters (pack of 2; sold separately – see stock # 61127). A 16' cable with M12 DC four-pin adapter (stock # 43299) is also required.
- Flow Range: 0.10 to 26.4
- Resolution Flow/Tempurature: 0.05 gpm/0.1°F
- Accuracy: ± (2% of reading + 0.5% of full scale)
- Max pressure: 232 psi (16 bar)