• Operate the curb stop valve from ground level—there's no top cap to remove!
• Adjust telescoping SS operating rod system to the height you need
• Tracer wire terminal block attached to curb box top for easy locating

The Kurb T.O.P. curb box system makes it easy to operate the curb stop valve from ground level. There's no need to remove the top cap or plug—just turn the pentagon key a 1/4 turn and the curb stop valve is on or off. This prevents rocks and debris from entering the curb box and breaking the valve—a common problem with standard curb boxes.

This revolutionary system is easy to install. Adjust the telescoping stainless steel operating rod to the height you need. The outer barrel system is made of heavy-duty Sch. 40 PVC pipe to prevent corrosion. Use the built-in tracer wire terminal block to connect tracer wire to the top of the unit. The top and operating nut are made of heavy-duty cast iron for fast location with a metal detector. An optional tamper-resistant cap covers the pentagon nut to prevent unauthorized operation.

Convert your existing curb box to a Kurb T.O.P. System; we offer two options. The economical Retrofit System converts most 1-1/4" or 1-1/2" curb boxes that use common steel rods. It connects directly to your valve letting you operate it from ground level. Order a large rod adapter to adapt most larger steel rods.

The Rod Conversion System totally converts your current 1-1/4" or 1-1/2" steel curb boxes to a Kurb T.O.P. curb box. Choose from three sizes based on depth. A retrofit pipe adapter attaches 1-1/2" MIP thread Kurb T.O.P. systems to the 1-1/4" conventional steel curb box pipe. Pipe adapters can also be used with the Retrofit System.

Choose from three Kurb T.O.P. models. The Kurb T.O.P. accepts 3/4" 1" and 1-1/4" curb stop valves. For 1-1/2" and 2" curb stop valves a curb stop increaser is available. The Kurb T.O.P. is a Minneapolis pattern box; order an optional Arch pattern adapter if necessary.