Seametrics Insertion Mag Meter EX810, 1"-3" Pipe Size
Description
- Seametrics EX810 & EX820 Insertion Electromagnetic Flowmeters
- Outstanding reliability—no moving parts to wear out, jam or break
- Great for use in clean or dirty water
These insertion electromagnetic flowmeters offer outstanding performance and reliability. Use them in clean water, turbid water or water with suspended solids. Units operate using the principle of Faraday's Law—as fluid moves through a rapidly reversing magnetic field, a voltage is generated in proportion to the flow rate.
Materials: 316 SS Sensor Body & Shaft, PVDF Electrode Cap, Hastelloy® Electrodes, cast powder-coated aluminum housing, EPDM O-Ring
To display flow rate and total flow, order a Seametrics FT430 or FT440 flow monitor/totalizer (sold separately). Pairing with a monitor/totalizer also provides the use of scaleable outputs (pulse and or analog 4-20 mA; varies by model).
Note: Installation fitting required (sold separately). Tee-style fittings (including PVC saddles) are factory flow tested, and printed with their accurate K-factor value.
- Pipe Size: 1 to 3"
- Flow velocity range: 0.28 to 20 ft/sec
- Conductivity: >20 uS/cm
- Maximum pressure: 200 psi
- Operating temperature: 32 to 200°F
- Certifications: NSF/ANSI Standard 61 and NSF 372
Product Information
- Item number
- 11743
- Brand Name
- Seametrics
- Catalog Page
- 408
- Net weight
- 3.4
- Condition
- New
Seametrics Insertion Mag Meter EX810, 1"-3" Pipe Size
- Item number
- 11743
- Brand Name
- Seametrics
- Catalog Page
- 408
- Net weight
- 3.4
- Condition
- New
- Seametrics EX810 & EX820 Insertion Electromagnetic Flowmeters
- Outstanding reliability—no moving parts to wear out, jam or break
- Great for use in clean or dirty water
These insertion electromagnetic flowmeters offer outstanding performance and reliability. Use them in clean water, turbid water or water with suspended solids. Units operate using the principle of Faraday's Law—as fluid moves through a rapidly reversing magnetic field, a voltage is generated in proportion to the flow rate.
Materials: 316 SS Sensor Body & Shaft, PVDF Electrode Cap, Hastelloy® Electrodes, cast powder-coated aluminum housing, EPDM O-Ring
To display flow rate and total flow, order a Seametrics FT430 or FT440 flow monitor/totalizer (sold separately). Pairing with a monitor/totalizer also provides the use of scaleable outputs (pulse and or analog 4-20 mA; varies by model).
Note: Installation fitting required (sold separately). Tee-style fittings (including PVC saddles) are factory flow tested, and printed with their accurate K-factor value.
- Pipe Size: 1 to 3"
- Flow velocity range: 0.28 to 20 ft/sec
- Conductivity: >20 uS/cm
- Maximum pressure: 200 psi
- Operating temperature: 32 to 200°F
- Certifications: NSF/ANSI Standard 61 and NSF 372