E+H Cerabar M PMC51 Pressure Transmitter With Display, 0-150 PSI
Description
- Impervious to abrasion and deep vacuum conditions
- High accuracy to ±0.1% of set span
- Choose from blind transmitters or transmitters with LCD display
The Endress+Hauser Cerabar M pressure transmitters measure gauge and absolute pressure of gases, vapors and liquids using patented Ceraphire® ceramic sensor technology. This diaphragm sensor also offers excellent stability for a much longer interval between zero and span adjustments.
Rugged and accurate, the stability of these transmitters is better than ±0.1% of the set span or ±0.25 of URL over 5 years. Use them virtually anywhere—since there's no oil in the measuring cell, the transmitter is not position sensitive. They're simple to set up and operate via 4-20 mA or HART® interface. No reference pressure is required to set the zero and span adjustments.
Choose from blind transmitters or transmitters with a 4-digit LCD display and push button keypad, which allows you to configure directly at your transmitter. Both types feature a powder-coated cast aluminum housing and mounting bracket. Contact USABlueBook for custom calibration ranges.
- Mfr #: PMC51-FA21JD1MGFR1JAAA
- Min. Pressure: 7.5 psi
- Accuracy: ±0.1% of set span
- Power: 10.5 to 30 VDC
- Process connection: 1/4" NPT(F)
Product Information
- Item number
- 37235
- Brand Name
- Endress and Hauser
- Catalog Page
- 864
- Net weight
- 5
- Condition
- New
E+H Cerabar M PMC51 Pressure Transmitter With Display, 0-150 PSI
- Item number
- 37235
- Brand Name
- Endress and Hauser
- Catalog Page
- 864
- Net weight
- 5
- Condition
- New
- Impervious to abrasion and deep vacuum conditions
- High accuracy to ±0.1% of set span
- Choose from blind transmitters or transmitters with LCD display
The Endress+Hauser Cerabar M pressure transmitters measure gauge and absolute pressure of gases, vapors and liquids using patented Ceraphire® ceramic sensor technology. This diaphragm sensor also offers excellent stability for a much longer interval between zero and span adjustments.
Rugged and accurate, the stability of these transmitters is better than ±0.1% of the set span or ±0.25 of URL over 5 years. Use them virtually anywhere—since there's no oil in the measuring cell, the transmitter is not position sensitive. They're simple to set up and operate via 4-20 mA or HART® interface. No reference pressure is required to set the zero and span adjustments.
Choose from blind transmitters or transmitters with a 4-digit LCD display and push button keypad, which allows you to configure directly at your transmitter. Both types feature a powder-coated cast aluminum housing and mounting bracket. Contact USABlueBook for custom calibration ranges.
- Mfr #: PMC51-FA21JD1MGFR1JAAA
- Min. Pressure: 7.5 psi
- Accuracy: ±0.1% of set span
- Power: 10.5 to 30 VDC
- Process connection: 1/4" NPT(F)