Partech SoliTechw2 IR Solids Sensor with 0 to 10,000 mg/L Range, 228796
Description
- High-quality multi-pin IP68 connectors
- Withstands tough conditions found in clarifiers, thickeners and wastewater tanks
- Compatible with Partech 750w² Handheld Portable Meter
SoliTechw² IR sensors measure suspended solids (or turbidity/sludge density). Choose from multiple ranges to maximize accuracy over a wide range of applications. The two-prong 960 nm light sensor features a rugged acetal co-polymer body that withstands tough conditions found in clarifiers, thickeners and wastewater tanks. Calibration values are stored in memory, so daily recalibration is not required—simply clean the sensor after use. Monthly calibration is sufficient for proper operation. Measure in units of mg/L, g/L %, NTU, FTU, FNU, or FAU.
For a complete system, order a 750w² meter and the OxyTechw² RDO sensor and/or SoliTechw² IR suspended solids sensor. Sensors are easily swapped out via the IP68-rated input connector.
- Cable Length: 33'L
- Range: 0 to 10,000 mg/L
- Sensor cable: Polyurethane
- Accuracy: ±5% of measured value or ±50 mg/l whichever is greater
- Limit of Detection: 50 mg/L
- Min Operating Range: 0 to 1000 mg/L
- Operating temp: 0 to 140°F
- Enclosure: IP68 Black Acetal Co-Polymer
- Dimensions: 3.7"H x 0.98"D
Product Information
- Item number
- 53537
- Brand Name
- Partech
- Catalog Page
- 1514
- Net weight
- 1
- Condition
- New
Partech SoliTechw2 IR Solids Sensor with 0 to 10,000 mg/L Range, 228796
- Item number
- 53537
- Brand Name
- Partech
- Catalog Page
- 1514
- Net weight
- 1
- Condition
- New
- High-quality multi-pin IP68 connectors
- Withstands tough conditions found in clarifiers, thickeners and wastewater tanks
- Compatible with Partech 750w² Handheld Portable Meter
SoliTechw² IR sensors measure suspended solids (or turbidity/sludge density). Choose from multiple ranges to maximize accuracy over a wide range of applications. The two-prong 960 nm light sensor features a rugged acetal co-polymer body that withstands tough conditions found in clarifiers, thickeners and wastewater tanks. Calibration values are stored in memory, so daily recalibration is not required—simply clean the sensor after use. Monthly calibration is sufficient for proper operation. Measure in units of mg/L, g/L %, NTU, FTU, FNU, or FAU.
For a complete system, order a 750w² meter and the OxyTechw² RDO sensor and/or SoliTechw² IR suspended solids sensor. Sensors are easily swapped out via the IP68-rated input connector.
- Cable Length: 33'L
- Range: 0 to 10,000 mg/L
- Sensor cable: Polyurethane
- Accuracy: ±5% of measured value or ±50 mg/l whichever is greater
- Limit of Detection: 50 mg/L
- Min Operating Range: 0 to 1000 mg/L
- Operating temp: 0 to 140°F
- Enclosure: IP68 Black Acetal Co-Polymer
- Dimensions: 3.7"H x 0.98"D