Seametrics® iMAG 4700p 2" Flow Meter VDC Powered, Integral Display
Description
- NSF-61 certified for potable water use
- IP68-rated for installation in flooded and below-grade areas
Measure flow in industrial water, wastewater and pump station applications. These economical meters have no moving or mechanical parts to clog or wear out, making them a perfect alternative to mechanical flowmeters. Units are ideal for tight plumbing installations since they require fewer straight pipe diameters than most comparable meters.
Their multiline alphanumeric LCD screen displays both flowrate and total flow. Setup and programming are easy via two touch-sensor keys—just follow the on-screen prompts. Bidirectional flow measurement is standard with forward, reverse and net flow totalization.
Meters feature pulse and 4-20 mA analog outputs; external 24-VDC power supply (sold separately) is required for loop powering the 4-20 mA signal. Back-up battery pack (included) provides auxiliary power in the event of a power failure. Features forward-facing integral display.
Additional options are available, including meters with high-speed digital outputs, 4-20 mA (HART®) outputs, Modbus RTU, integral data loggers, and 85-264 VAC power supplies. Contact USABlueBook for more information. Note: We recommend using a pair of grounding rings for non-metallic pipe applications (sold separately).
Includes: Pair of full-faced gaskets and 20'L, 6 conductor cable for power & output signal wiring. Shipping: Ships by ground only.
- Lay Length: 7.9"
- Flow Rate: 2 to 321 gpm
- Flange: 2" diameter ANSI 150 lbs, 4-bolt round
- Accuracy: ±0.75% of reading ±0.025% of full scale flow
- Output: 4-20 mA current loop, 24 VDC; scaled pulse, current sinking, 36 VDC max
- Power: external DC power supply (sold separately), 9-36 VDC @ 250 mA max (30 mA average)
- Materials: Body/flow tube: epoxy-coated welded steel; Lining: Texin® flange, polyurethane/Noryl® body; die-cast aluminum electronics housing; 316 stainless steel electrodes
- Approvals: NSF-61, IP68 (rated continuous under water to depth of 10 ft)
- Display: 128 x 64 LCD; 5-digit flow rate, 8-digit total flow
Product Information
- Item number
- 66301
- Brand Name
- Seametrics
- Catalog Page
- 385
- Net weight
- 21
- Condition
- New
Accessories
Alternate
Related
Seametrics® iMAG 4700p 2" Flow Meter VDC Powered, Integral Display
- Item number
- 66301
- Brand Name
- Seametrics
- Catalog Page
- 385
- Net weight
- 21
- Condition
- New
- NSF-61 certified for potable water use
- IP68-rated for installation in flooded and below-grade areas
Measure flow in industrial water, wastewater and pump station applications. These economical meters have no moving or mechanical parts to clog or wear out, making them a perfect alternative to mechanical flowmeters. Units are ideal for tight plumbing installations since they require fewer straight pipe diameters than most comparable meters.
Their multiline alphanumeric LCD screen displays both flowrate and total flow. Setup and programming are easy via two touch-sensor keys—just follow the on-screen prompts. Bidirectional flow measurement is standard with forward, reverse and net flow totalization.
Meters feature pulse and 4-20 mA analog outputs; external 24-VDC power supply (sold separately) is required for loop powering the 4-20 mA signal. Back-up battery pack (included) provides auxiliary power in the event of a power failure. Features forward-facing integral display.
Additional options are available, including meters with high-speed digital outputs, 4-20 mA (HART®) outputs, Modbus RTU, integral data loggers, and 85-264 VAC power supplies. Contact USABlueBook for more information. Note: We recommend using a pair of grounding rings for non-metallic pipe applications (sold separately).
Includes: Pair of full-faced gaskets and 20'L, 6 conductor cable for power & output signal wiring. Shipping: Ships by ground only.
- Lay Length: 7.9"
- Flow Rate: 2 to 321 gpm
- Flange: 2" diameter ANSI 150 lbs, 4-bolt round
- Accuracy: ±0.75% of reading ±0.025% of full scale flow
- Output: 4-20 mA current loop, 24 VDC; scaled pulse, current sinking, 36 VDC max
- Power: external DC power supply (sold separately), 9-36 VDC @ 250 mA max (30 mA average)
- Materials: Body/flow tube: epoxy-coated welded steel; Lining: Texin® flange, polyurethane/Noryl® body; die-cast aluminum electronics housing; 316 stainless steel electrodes
- Approvals: NSF-61, IP68 (rated continuous under water to depth of 10 ft)
- Display: 128 x 64 LCD; 5-digit flow rate, 8-digit total flow