Seametrics® IP820P Tee-Mount Paddlewheel Flow Sensor for 4-8" Pipe, PVC
Description
- Sensor automatically sets to correct pipe placement within custom installation fitting
- Flow velocity range of 0.3 to 30 ft/sec
These paddlewheel flow sensors operate as part of a proprietary system that makes installation a breeze. Just insert the sensor into the custom installation fitting (sold separately), and install on your pipe. Sensor and fitting are sized exactly to the pipe; no worrying about making the right adjustment. Enter the K factor displayed on your fitting into a Seametrics flow monitor (sold separately below) and you're ensured of maximum accuracy, with no variables to adjust for.
These sensors are suitable for a variety of pipe sizes, and across a wide range of velocities. They can even be used with slightly turbid gray water, but are not recommended for wastewater. Durable construction ensures years of trouble-free service.
Standard flow sensors are powered externally by a DC power supply (sold separately). Use them with FT430 and FT440 flow monitors/totalizers.
Materials: PVC body, nickel-bound tungsten carbide shaft, PVDF rotor, ruby jewel bearings, EPDM O-rings and 18'L AWG 22, 4 conductor sensor cable.
- Pipe Size: 4 to 8"
- Accuracy: ±1.5% of full scale
- Output: Hall effect sensor, 12-VDC current sinking pulse
- Maximum pressure: 175 psi
- Maximum temperature: 130°F
Product Information
- Item number
- 24140
- Brand Name
- Seametrics
- Catalog Page
- 411
- Net weight
- 1
- Condition
- New
Seametrics® IP820P Tee-Mount Paddlewheel Flow Sensor for 4-8" Pipe, PVC
- Item number
- 24140
- Brand Name
- Seametrics
- Catalog Page
- 411
- Net weight
- 1
- Condition
- New
- Sensor automatically sets to correct pipe placement within custom installation fitting
- Flow velocity range of 0.3 to 30 ft/sec
These paddlewheel flow sensors operate as part of a proprietary system that makes installation a breeze. Just insert the sensor into the custom installation fitting (sold separately), and install on your pipe. Sensor and fitting are sized exactly to the pipe; no worrying about making the right adjustment. Enter the K factor displayed on your fitting into a Seametrics flow monitor (sold separately below) and you're ensured of maximum accuracy, with no variables to adjust for.
These sensors are suitable for a variety of pipe sizes, and across a wide range of velocities. They can even be used with slightly turbid gray water, but are not recommended for wastewater. Durable construction ensures years of trouble-free service.
Standard flow sensors are powered externally by a DC power supply (sold separately). Use them with FT430 and FT440 flow monitors/totalizers.
Materials: PVC body, nickel-bound tungsten carbide shaft, PVDF rotor, ruby jewel bearings, EPDM O-rings and 18'L AWG 22, 4 conductor sensor cable.
- Pipe Size: 4 to 8"
- Accuracy: ±1.5% of full scale
- Output: Hall effect sensor, 12-VDC current sinking pulse
- Maximum pressure: 175 psi
- Maximum temperature: 130°F