WIKA 300psi Submersible Level Transmitter,LH-20 with 710' cable, 52406067
Description
- Small 0.87" diameter fits into tight places
- High ±0.1% BFSL accuracy
- Integrated lightning protection provides added reliability
The WIKA LH-20 series transmitters measure just 0.87" dia—great for small bore holes and wells. These highly accurate units feature a vented cable for barometric pressure adjustments, ensuring precise readings. Integrated lightning protection reduces the effects of power supply surges and lightning ground strike transients.
A vent filter is included with each LH-20 transmitter. We highly recommended that you install this vent filter to prolong the life of your transmitter. Just place the filter at the end of the vent tube where it terminates at the electrical enclosure. This will ensure that no moisture enters the transmitter and causes failures. For applications prone to heavy moisture build-up, purchase the optional desiccant drying cartridge to use in place of the vent filter.
Note: Low pressure models that measure in inches of water column, and models with extended cable lengths are available. Contact USABlueBook for more information.
- Wetted materials: 316L SS case, FKM (Viton®) seal
- Accuracy: ±0.1% BFSL (±0.2% of span)
- Power: 8 to 36 VDC
- Output: 4-20 mA, 2-wire
- Operating conditions: -40 to 176°F
Product Information
- Item number
- 43003
- Brand Name
- WIKA Instruments Company
- Net weight
- 48.39
- Condition
- New
Related
WIKA 300psi Submersible Level Transmitter,LH-20 with 710' cable, 52406067
- Item number
- 43003
- Brand Name
- WIKA Instruments Company
- Net weight
- 48.39
- Condition
- New
- Small 0.87" diameter fits into tight places
- High ±0.1% BFSL accuracy
- Integrated lightning protection provides added reliability
The WIKA LH-20 series transmitters measure just 0.87" dia—great for small bore holes and wells. These highly accurate units feature a vented cable for barometric pressure adjustments, ensuring precise readings. Integrated lightning protection reduces the effects of power supply surges and lightning ground strike transients.
A vent filter is included with each LH-20 transmitter. We highly recommended that you install this vent filter to prolong the life of your transmitter. Just place the filter at the end of the vent tube where it terminates at the electrical enclosure. This will ensure that no moisture enters the transmitter and causes failures. For applications prone to heavy moisture build-up, purchase the optional desiccant drying cartridge to use in place of the vent filter.
Note: Low pressure models that measure in inches of water column, and models with extended cable lengths are available. Contact USABlueBook for more information.
- Wetted materials: 316L SS case, FKM (Viton®) seal
- Accuracy: ±0.1% BFSL (±0.2% of span)
- Power: 8 to 36 VDC
- Output: 4-20 mA, 2-wire
- Operating conditions: -40 to 176°F