Seametrics IP210B-04 Battery Powered Flow Sensor, Brass, 12" to 40" Pipe
Description
- Safe for use with slightly turbid gray water
- Sensors operate over a wide range of velocities
Seametrics paddlewheel insertion flow sensors provide reliable economical flow metering where water quality isn't clear enough to use a turbine sensor. Their proven Hall effect technology with NPN output interfaces with Seametrics flow monitors and a variety of other instrumentation. Durable construction ensures years of trouble-free service. Available paddlewheel repair kit allows you to replace the entire rotor assembly in just minutes; includes rotor, shaft and bearing.
Micro-powered flow sensors are for use with FT450 flow monitors/totalizers. Perfect for remote locations, the FT450's internal battery supplies power to the sensor.
Materials: Brass Body, nickel-bound tungsten carbide shaft, PVDF Rotor, ruby jewel bearings, cast aluminum O-ring.
Per the Federal Reduction of Lead in Drinking Water Act – this item cannot be used in potable (drinking) water applications
- Pipe Size: 12 to 40"
- Fitting Size: 1-1/2" NPT(M)
- Maximum Pressure: 200 psi
- Maximum temperature: 200°F
- Power: 3.5-16 VDC, 60 µA current draw @ 3.6 VDC (FT450 lithium battery supply)
Product Information
- Item number
- 11704
- Brand Name
- Seametrics
- Catalog Page
- 410
- Net weight
- 4.9
- Condition
- New
Alternate
Seametrics IP210B-04 Battery Powered Flow Sensor, Brass, 12" to 40" Pipe
- Item number
- 11704
- Brand Name
- Seametrics
- Catalog Page
- 410
- Net weight
- 4.9
- Condition
- New
- Safe for use with slightly turbid gray water
- Sensors operate over a wide range of velocities
Seametrics paddlewheel insertion flow sensors provide reliable economical flow metering where water quality isn't clear enough to use a turbine sensor. Their proven Hall effect technology with NPN output interfaces with Seametrics flow monitors and a variety of other instrumentation. Durable construction ensures years of trouble-free service. Available paddlewheel repair kit allows you to replace the entire rotor assembly in just minutes; includes rotor, shaft and bearing.
Micro-powered flow sensors are for use with FT450 flow monitors/totalizers. Perfect for remote locations, the FT450's internal battery supplies power to the sensor.
Materials: Brass Body, nickel-bound tungsten carbide shaft, PVDF Rotor, ruby jewel bearings, cast aluminum O-ring.
Per the Federal Reduction of Lead in Drinking Water Act – this item cannot be used in potable (drinking) water applications
- Pipe Size: 12 to 40"
- Fitting Size: 1-1/2" NPT(M)
- Maximum Pressure: 200 psi
- Maximum temperature: 200°F
- Power: 3.5-16 VDC, 60 µA current draw @ 3.6 VDC (FT450 lithium battery supply)