Geotech Geosub 2 Sampling Pump w/ 100-ft Cable and Georeel, 81400300
Description
- Flow sampling as low as 10 mL/minute
- User-enabled dry-run protection
- Easy to service and decontaminate
Sample with confidence even in the harshest well conditions using these versatile single-stage 2/3-hp pumps. They feature 316 SS, HDPE and PEEK wetted parts that won't affect sample integrity. Pumps disassemble easily for decontamination and basic maintenance. At 13.2"L x 1.75"OD, they fit into tight wells. Discharge port has 1/4"NPT(F) and 3/8" hose barb. Tubing not included.
All systems require a controller (stock # 86231) and connecting cable (stock # 86238). Geosub 2 controller provides safe, conditioned variable DC power from an AC power source (optional DC/AC inverter, stock # 86239, lets you run power from a vehicle battery). Use the controller to precisely control water sampling flow rates from high purge to low flow, down to 10 mL/min. Controller features an easy-to-use pushbutton interface and bright display. It stores and recalls 80 well site-specific settings for efficient, repeatable sampling. User settable dry-run protection automatically turns the pump off if it becomes unsubmerged. Note: Flow rate must be above 0.1 gpm to use dry-run protection.
Optional drop tube assembly housing and intake (stock #s 94554 & 94555) extend the reach of the pump, allowing you to place the intake into a deeper screened part of the well. Customize to each well by cutting optional tubing to length. Note: Pump must stay submerged below the static water line even with drop-tube attachment.
For a complete system, order:
1. Geosub 2 Pump
2. Geosub 2 Controller (stock # 86231)
3. Connecting Cable (stock # 86238).
Product Information
- Item number
- 86232
- Brand Name
- Geotech Environmental
- Catalog Page
- 1529
- Net weight
- 24
- Condition
- New
Accessories
Related
Geotech Geosub 2 Sampling Pump w/ 100-ft Cable and Georeel, 81400300
- Item number
- 86232
- Brand Name
- Geotech Environmental
- Catalog Page
- 1529
- Net weight
- 24
- Condition
- New
- Flow sampling as low as 10 mL/minute
- User-enabled dry-run protection
- Easy to service and decontaminate
Sample with confidence even in the harshest well conditions using these versatile single-stage 2/3-hp pumps. They feature 316 SS, HDPE and PEEK wetted parts that won't affect sample integrity. Pumps disassemble easily for decontamination and basic maintenance. At 13.2"L x 1.75"OD, they fit into tight wells. Discharge port has 1/4"NPT(F) and 3/8" hose barb. Tubing not included.
All systems require a controller (stock # 86231) and connecting cable (stock # 86238). Geosub 2 controller provides safe, conditioned variable DC power from an AC power source (optional DC/AC inverter, stock # 86239, lets you run power from a vehicle battery). Use the controller to precisely control water sampling flow rates from high purge to low flow, down to 10 mL/min. Controller features an easy-to-use pushbutton interface and bright display. It stores and recalls 80 well site-specific settings for efficient, repeatable sampling. User settable dry-run protection automatically turns the pump off if it becomes unsubmerged. Note: Flow rate must be above 0.1 gpm to use dry-run protection.
Optional drop tube assembly housing and intake (stock #s 94554 & 94555) extend the reach of the pump, allowing you to place the intake into a deeper screened part of the well. Customize to each well by cutting optional tubing to length. Note: Pump must stay submerged below the static water line even with drop-tube attachment.
For a complete system, order:
1. Geosub 2 Pump
2. Geosub 2 Controller (stock # 86231)
3. Connecting Cable (stock # 86238).