Labconco Micro Digestor 6-Port, 115V, 6030000
Description
- Do your own TKN for faster results
- Compact designs fit in an acid fume hood
- Macro Rapid Systems
Are you sending your TKN (Total Kjeldahl nitrogen) samples out for analysis? Performing TKN in your lab can give you faster results for a lower cost, with more control over data quality. Labconco has been making high-quality Kjeldahl determination apparatuses since 1925. Two systems are available: Macro Classical Units and Macro Rapid Units. For both system types, you must order a digestion unit, distillation unit and all required accessories.
Use Macro Rapid digestion and distillation units together for determination of nitrogen in higher concentration samples. This system uses 250-mL tubes to process 15- to 25-mL wastewater samples (or 1-g dry sample) in each tube.
The Rapid Digestor comes in 4- or 25-place units. Each tube has its own ceramic block heater for efficient, uniform heating. A platinum RTD sensor detects internal temperature to ensure consistent temperature control from ambient to 450°C. The 25-place model also features a convenient carrier rack with heat shields that holds glassware in place for easy handling, loading and washing.
The RapidStill II distillation apparatus uses fast steam distillation for macro concentrations of nitrogen. Setup is easy: just plug the unit in, connect lab water to inlet and insert tubing into the peristaltic pump to dispense user-provided NaOH. Typical distillation times range from 5 to 10 minutes. A safety door surrounds the digestion tube, protecting the operator from digestion tube breakage. Inlet tubes for steam and NaOH are made of chemically inert PTFE for long life. This unit includes the tubing required for water connection. The compact design conveniently fits on a lab bench.
Accessories: Order digestion tubes separately. The 4-place Rapid digestor's fume removal system requires a lab faucet vacuum aspirator and 3/8" ID tubing.
SAFETY NOTE: Digestion systems use high temperatures with acid and produce acid gases. Distillation systems produce excess heat and involve boiling concentrated NaOH. They should be used inside an appropriate fume hood or with a fume removal system and safety shield. Always wear appropriate eye protection, hand protection and clothing (full face shield and full neoprene apron).
Product Information
- Item number
- 74052
- Brand Name
- Labconco
- Net weight
- 21
- Condition
- New
Labconco Micro Digestor 6-Port, 115V, 6030000
- Item number
- 74052
- Brand Name
- Labconco
- Net weight
- 21
- Condition
- New
- Do your own TKN for faster results
- Compact designs fit in an acid fume hood
- Macro Rapid Systems
Are you sending your TKN (Total Kjeldahl nitrogen) samples out for analysis? Performing TKN in your lab can give you faster results for a lower cost, with more control over data quality. Labconco has been making high-quality Kjeldahl determination apparatuses since 1925. Two systems are available: Macro Classical Units and Macro Rapid Units. For both system types, you must order a digestion unit, distillation unit and all required accessories.
Use Macro Rapid digestion and distillation units together for determination of nitrogen in higher concentration samples. This system uses 250-mL tubes to process 15- to 25-mL wastewater samples (or 1-g dry sample) in each tube.
The Rapid Digestor comes in 4- or 25-place units. Each tube has its own ceramic block heater for efficient, uniform heating. A platinum RTD sensor detects internal temperature to ensure consistent temperature control from ambient to 450°C. The 25-place model also features a convenient carrier rack with heat shields that holds glassware in place for easy handling, loading and washing.
The RapidStill II distillation apparatus uses fast steam distillation for macro concentrations of nitrogen. Setup is easy: just plug the unit in, connect lab water to inlet and insert tubing into the peristaltic pump to dispense user-provided NaOH. Typical distillation times range from 5 to 10 minutes. A safety door surrounds the digestion tube, protecting the operator from digestion tube breakage. Inlet tubes for steam and NaOH are made of chemically inert PTFE for long life. This unit includes the tubing required for water connection. The compact design conveniently fits on a lab bench.
Accessories: Order digestion tubes separately. The 4-place Rapid digestor's fume removal system requires a lab faucet vacuum aspirator and 3/8" ID tubing.
SAFETY NOTE: Digestion systems use high temperatures with acid and produce acid gases. Distillation systems produce excess heat and involve boiling concentrated NaOH. They should be used inside an appropriate fume hood or with a fume removal system and safety shield. Always wear appropriate eye protection, hand protection and clothing (full face shield and full neoprene apron).