Hach TU5300sc Turbidimeter with Internal System Check, RFID & Flow Sensor (Includes SC4500 Controller), LXV525.97KTO040
Description
- Complete system includes both a turbidimeter and a 2-input SC4500 controller
- Patented optical 360° x 90° Detection™ for maximum accuracy and repeatability
- Small sample volume delivers immediate readings and allows faster cleaning
These turbidimeters deliver outstanding low-level precision and sensitivity in drinking water and other high-purity applications. Patented optical 360° x 90° Detection™ captures 90° scatter through 360° of detection for maximum accuracy. Meters deliver immediate readings, thanks to their small sample surface chamber volume—up to 98% smaller than other meters. This also makes cleaning much easier.
Sensors track internal temperature and humidity, alerting you to condensation issues. They use quick-replacement sealed vials for easy calibration. An active drying system with desiccant cartridge and air pump circulates dried air throughout the sample cell compartment.
RFID-enabled turbidimeters offer added convenience and prevention of manual errors. Simply add RFID tags to your samples to store data and transfer information between RFID-capable TU5 instruments, including benchtop turbidimeters. These units also feature Internal System Check, which automatically checks the cleanliness and quality of the sample vial, and alerts you if the vial is missing or compromised.
Includes: SC4500 2-input controller, mounting bracket (fits pattern for legacy 1720E sensors), service vial removal tool, desiccant cartridge, flow regulator valve, integral 5-ft digital cable, and maintenance bracket (stores chamber lid and tools when you are performing routine maintenance). Also includes In-line flow sensor (same as stock # 93652) allowing for display of inlet flow rate.
Optional accessories are strongly recommended to ensure reliable results. Automatic cleaning module (stock # 93651) uses a motorized wiper that's set to user-defined intervals (replaces the standard chamber lid).
Note: Turbidimeter must be used in conjunction with a Hach digital controller, such as the SC4500 (included with this model) or SC1000. A calibration lid is also required; purchase separately (stock # 93661) or with maintenance kit (stock # 72855).
- Range: 0 to 700 NTU, FNU & FTU
- Accuracy: ±2% of reading plus 0.01 NTU (up to 40 NTU), ±10% of reading (over 40 NTU); based on Formazin at 25°C (77°F).
- Repeatability: <1% of reading or ±0.0006 NTU, whichever is greater
- Response Time: T90 <30 seconds at 100 mL/min
- Sample flow rate: 100 to 1000 mL/min (1.6 to 15.9 gal/hour); optimal: 200 to 500 mL/min (3.2 to 7.9 gal/hour)
Product Information
- Item number
- 16509
- Brand Name
- Hach Company
- Catalog Page
- 1136
- Net weight
- 22
- Condition
- New
Hach TU5300sc Turbidimeter with Internal System Check, RFID & Flow Sensor (Includes SC4500 Controller), LXV525.97KTO040
- Item number
- 16509
- Brand Name
- Hach Company
- Catalog Page
- 1136
- Net weight
- 22
- Condition
- New
- Complete system includes both a turbidimeter and a 2-input SC4500 controller
- Patented optical 360° x 90° Detection™ for maximum accuracy and repeatability
- Small sample volume delivers immediate readings and allows faster cleaning
These turbidimeters deliver outstanding low-level precision and sensitivity in drinking water and other high-purity applications. Patented optical 360° x 90° Detection™ captures 90° scatter through 360° of detection for maximum accuracy. Meters deliver immediate readings, thanks to their small sample surface chamber volume—up to 98% smaller than other meters. This also makes cleaning much easier.
Sensors track internal temperature and humidity, alerting you to condensation issues. They use quick-replacement sealed vials for easy calibration. An active drying system with desiccant cartridge and air pump circulates dried air throughout the sample cell compartment.
RFID-enabled turbidimeters offer added convenience and prevention of manual errors. Simply add RFID tags to your samples to store data and transfer information between RFID-capable TU5 instruments, including benchtop turbidimeters. These units also feature Internal System Check, which automatically checks the cleanliness and quality of the sample vial, and alerts you if the vial is missing or compromised.
Includes: SC4500 2-input controller, mounting bracket (fits pattern for legacy 1720E sensors), service vial removal tool, desiccant cartridge, flow regulator valve, integral 5-ft digital cable, and maintenance bracket (stores chamber lid and tools when you are performing routine maintenance). Also includes In-line flow sensor (same as stock # 93652) allowing for display of inlet flow rate.
Optional accessories are strongly recommended to ensure reliable results. Automatic cleaning module (stock # 93651) uses a motorized wiper that's set to user-defined intervals (replaces the standard chamber lid).
Note: Turbidimeter must be used in conjunction with a Hach digital controller, such as the SC4500 (included with this model) or SC1000. A calibration lid is also required; purchase separately (stock # 93661) or with maintenance kit (stock # 72855).
- Range: 0 to 700 NTU, FNU & FTU
- Accuracy: ±2% of reading plus 0.01 NTU (up to 40 NTU), ±10% of reading (over 40 NTU); based on Formazin at 25°C (77°F).
- Repeatability: <1% of reading or ±0.0006 NTU, whichever is greater
- Response Time: T90 <30 seconds at 100 mL/min
- Sample flow rate: 100 to 1000 mL/min (1.6 to 15.9 gal/hour); optimal: 200 to 500 mL/min (3.2 to 7.9 gal/hour)