Tempest Polymer Feed System, 0.4 GPH (Polymer), 150 GPH (Dilution Water), 110 VAC
Description
- Motorless multi-stage mixing optimizes hydration and activation
- Automatic mode makes operation simple—just enter your desired concentration
- Open design allows easy access to all components
Use Tempest systems to effectively mix and feed polymer. Their automatic control mode provides simplified operation. Just enter your desired polymer concentration on the touchpad—the controller takes care of the rest, providing ideal mixing energy at the initial wetting, and tapering through a multi-stage system of hydrating zones. System measures flow of the dilution water, and adjusts the polymer pump output to maintain desired concentration. The result is a fully hydrated polymer solution with maximum charge site exposure for optimized polymer performance and usage. Manual mode is also available if you prefer to adjust the polymer output yourself. Each feed cycle is followed by an adjustable flushing cycle to avoid clogging and keep your system working its best.
System flexibility allows remote start/stop and feed control for optimal equipment protection. Under low/no flow conditions, system shuts down and activates a relay for an alarm.
Units feature a three-line LCD screen with simple on-screen setup. During operation, screen indicates dilution water flow rate and concentration set point. Tubular stainless steel frame and sturdy polypropylene back panel ensure maximum stability.
Shipping: Ships motor freight.
- Mfr #: TPS-150-D.4
- Polymer Output: 0.02 to 0.40 gph; 15 to 150 gph dilution water flow
- Inlets: 1" NPT(F) water; 1/2" NPT(F) polymer; 1" NPT(F) solution
- Output: pump on/off: SPST (NO) 5A, 120 VAC; alarm relay: SPST (NO) 5A, 120 VAC
- Input: 4-20 mA, on/off
Product Information
- Item number
- 62920
- Brand Name
- Tempest
- Catalog Page
- 176
- Net weight
- 95
- Condition
- New
Accessories
Related
Tempest Polymer Feed System, 0.4 GPH (Polymer), 150 GPH (Dilution Water), 110 VAC
- Item number
- 62920
- Brand Name
- Tempest
- Catalog Page
- 176
- Net weight
- 95
- Condition
- New
- Motorless multi-stage mixing optimizes hydration and activation
- Automatic mode makes operation simple—just enter your desired concentration
- Open design allows easy access to all components
Use Tempest systems to effectively mix and feed polymer. Their automatic control mode provides simplified operation. Just enter your desired polymer concentration on the touchpad—the controller takes care of the rest, providing ideal mixing energy at the initial wetting, and tapering through a multi-stage system of hydrating zones. System measures flow of the dilution water, and adjusts the polymer pump output to maintain desired concentration. The result is a fully hydrated polymer solution with maximum charge site exposure for optimized polymer performance and usage. Manual mode is also available if you prefer to adjust the polymer output yourself. Each feed cycle is followed by an adjustable flushing cycle to avoid clogging and keep your system working its best.
System flexibility allows remote start/stop and feed control for optimal equipment protection. Under low/no flow conditions, system shuts down and activates a relay for an alarm.
Units feature a three-line LCD screen with simple on-screen setup. During operation, screen indicates dilution water flow rate and concentration set point. Tubular stainless steel frame and sturdy polypropylene back panel ensure maximum stability.
Shipping: Ships motor freight.
- Mfr #: TPS-150-D.4
- Polymer Output: 0.02 to 0.40 gph; 15 to 150 gph dilution water flow
- Inlets: 1" NPT(F) water; 1/2" NPT(F) polymer; 1" NPT(F) solution
- Output: pump on/off: SPST (NO) 5A, 120 VAC; alarm relay: SPST (NO) 5A, 120 VAC
- Input: 4-20 mA, on/off